PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

MIMO versus SISO : simulation results

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Efektywność systemu MIMO względem SISO : wyniki badań symulacyjnych
Języki publikacji
EN
Abstrakty
EN
Results of computer simulation tests of the STBC Alamouti MIMO 2×2 system in comparison to SISO were presented in this paper. The aim was to assess effectiveness of MIMO versus SISO in assumed propagation conditions. Depending on subscriber motion, propagation conditions as well as antenna system configuration, different results were received. In each configuration, MIMO system was not worse than SISO and many times it is significantly better than SISO with gain from a few to a dozen or so dB.
PL
W artykule zaprezentowano wyniki symulacji komputerowej systemu wieloantenowego MIMO 2×2 (ang. Multiple Input Multiple Output) z koderem STBC (ang. Space Time Block Coding) Alamoutiego w porównaniu do systemu SISO (ang. Single Input Single Output). Celem badania było określenie stopnia efektywności układu MIMO zależnie od prędkości i kierunku ruchu korespondenta, warunków propagacji oraz konfiguracji anten. Zależnie od założeń symulacyjnych uzyskano wyniki potwierdzające przewagę MIMO nad SISO w zakresie od kilku do kilkunastu dB.
Słowa kluczowe
EN
MIMO   Alamouti   OFDM   SISO   STBC  
PL
MIMO   Alamouti   OFDM   SISO   STBC  
Rocznik
Strony
223--239
Opis fizyczny
Bibliogr. 14 poz., rys.
Twórcy
autor
autor
Bibliografia
  • [1] E. Telatar, Capacity of multiantenna Gaussian channels, AT&T Bell Laboratories, Tech. Memo., June 1995.
  • [2] G. J. Foshini, Layered space-time architecture for wireless communication in a fading environment when using multielement antennas, Bell Labs. Tech. J., Autumn 1996.
  • [3] V. Tarokh, N. Seshadri, A. R. Calderbank, Space-time codes for high data rate wireless communication: performance criterion and code construction, IEEE Transactions on Information Theory, 44, 3, March 1998, 744-756.
  • [4] G. J. Foschini, M. J. Gans, On limits of wireless communications in a fading environment when using multiple antennas, AT&T Bell Labs Internal Tech. Memo, Sept. 1995. Published in Wireless Personal Communications, 6, 3, March 1998, 311-335.
  • [5] G. G. Raleigh, J. M. Cioffi, Spatio-temporal coding for wireless communication, IEEE Trans. on Communications, 46, 3, March 1998, 357-366.
  • [6] A. van Zelst, Space division multiplexing algorithms, in Proc. of the 10th Mediterranean Electrotechnical Conference (MELECON) 2000, 3, May 2000, 1218-1221.
  • [7] S. M. Alamouti, A simple transmit diversity technique for wireless communications, IEEE Journal on Selected Areas in Communications, 16, 8, Oct. 1998, 1451-1458. Decoding (equalisation) methods.
  • [8] F. P. Fontan, P. M. Espineira, Modelling the Wireless Propagation Channel. A Simulation Approach with MATLAB, J. Wiley & Sons, Chichester, 2008.
  • [9] J. P. Kermoal, L. Schumacher, K. I. Pedersen, P. E. Mogensen, F. Frederiksen, A Stochastic MIMO Radio Channel Model with Experimental Validation, IEEE Journal on Selected Areas in Communications, 20, 6, August 2002.
  • [10] A. Abdi, M. Kaveh, A Space-Time Correlation Model for Multielement Antenna Systems in Mobile Fading Channel, IEEE Journal on Selected Areas in Communications, 20, 3, April 2002.
  • [11] P-Y. Chen, H-J. Li, Modelling and Application of Space-Time Correlation for MIMO Fading Signals, IEEE Transaction on Vehicular Technology, 56, 4, July 2007.
  • [12] K. E. Baddour, N. Beaulieu, Accurate Simulation of Multiple Ceoss-Correlated Rician Fading Channel, IEEE Transaction on Communications, 52, 11, November 2004.
  • [13] A. A. M. Saleh, R. A. Valenzuela, Statistical Model for Indoor Multipath Propagation, IEEE Journal on Selected Areas in Communications, 5, 2, 1987.
  • [14] F. Perez Fontan, P. Marino Espineira, Modelling the Wireless Propagation Channel - A Simulation Approach with MATLAB, Wiley 2008.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWAN-0015-0012
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.