Quality control in the process of rings of train wheels manufacturing

• Autorzy: Topolska S.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The paper presents an example of the application of the complex quality control process and shows the advantages of such approach. Moreover it presents the analysis of a specific manufacturing process of rings of train wheels. Design/methodology/approach: In the presented works it has been presented a holistic approach to the process engineering. The investigations in the manufacturing plant and laboratory test allow showing the results of a complex quality control. Findings: Results confirm the importance of the new process engineering which links the traditional approach with the modern quality control. Also it proves that the quality control system must cooperate with the training system. Research limitations/implications: The investigation area has been limited to one industry plant. It was considered with the fact that the analyzed process is a much specified one. This situation doesn't make possible to compare results with the other data. The second limitation is considered with the commercial secret (some data is omitted). Practical implications: First main practical results could be described as elaborating the methodology of quality assurance of the specific and rare manufacturing processes. Secondly the paper shows how to link the technical and human factors in one integrated process. Originality/value: Firstly this paper presents the analysis of a very rare manufacturing process what is valuable of both scientific and educational points of view. Secondly it shows how to organize the rare production process with a complex quality control.

Słowa kluczowe

EN

manufacturing and processing; quality assessment

PL

ocena jakości; proces produkcyjny

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2008
• Tom: Vol. 31, nr 2
• Strony: 712--718
• Opis fizyczny: Bibliogr. 16 poz., wykr., tab., il.

Twórcy

autor

Topolska S.

• Division of Constructional and Special Materials, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] K. Abou El Hossein, Z. Yahya, High speed end milling of AISI 304 stainless steel using new geometrically developed carbide inserts, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME'2005, Gliwice-Wisła, 2005, 1-6.
• [2] J. Barzykowski, Modern Metrology, WNT, Warszawa (2004) (in Polish).
• [3] M. Blicharski, Material Engineering. Steel, WNT, Warszawa (2004), (in Polish).
• [4] L. A. Dobrzańki, Metal Engineering Materials, WNT, Warszawa (2004) (in Polish).
• [5] S. Fok, B. Mitchell, J. Smart, Testing to distinguish between failure laws for ceramics, Proceedings of the 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering AMME'2000, Gliwice-Sopot-Gdańsk, 2000, 187-190.
• [6] A. Gwiazda, The method of information ordering using the Pareto rule, Economics and Production Engineering, 11 (2002) 21-28 (in Polish).
• [7] T. Karpiński, Production Engineering, WNT, Warszawa (2004) (in Polish).
• [8] E. Kindlarski, Products Quality, Scientific Publisher PWN, Warszawa (1988) (in Polish).
• [9] J. Oakland, Total Quality Management, Oxford Press, Oxford (1994).
• [10] S. Rusz, The influence of technological parameters on the rotary pressing process, Proceedings of the 9th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME'2000, Gliwice-Sopot-Gdańsk, 2000, 475-478.
• [11] S. Tkaczyk, S. Topolska, Physico-Chemical Properties of TiN Films, Proceedings of Advanced Material and Technologies AMT 2001 (2001) 925-927.
• [12] S. Topolska, Characteristic defects of metallic coatings obtained in the metallization process, Proceedings of the 13th International Scientific Conference on Achievements in Mechanical and Materials Engineering, AMME'2005, Gliwice-Wisła, 2005, 675-680.
• [13] S. Topolska, Process of vacuum metallization-a simulation in the Taylor program, Proceedings of 11th International Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science, CAM3S 2005, Gliwice-Zakopane, 2005, (CD-ROM).
• [14] S. Topolska, Analysis of the Technological Process of Rings of Train Wheels, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 405-408.
• [15] J. Wyrzykowski, E. Pleszakow, J. Sieniawski, Strains and Fractures of Metals, WNT, Warszawa, (1999) (in Polish).
• [16] Documentation of the Steel Mill (the enjoyment according to the reservation of the X Steel Mill).