Model reference adaptive force and surface roughness control in milling

• Autorzy: Cus F. , Zuperl U.
• Języki publikacji: EN

Abstrakty

EN

Purpose: of this paper. The paper presents the model based mechanism of control assuring constant quality of surface finish by controlling the cutting forces in the end milling process. By dynamic adaptation of feeding and speed the system controls the surface roughness and the cutting forces on the milling cutter. The purpose of developing such a mechanism is to find the limitations of such control which maintains constant cutting force by adapting the cutting parameters. Design/methodology/approach: The model based system of control has been developed by the evolutionary method of genetic programming (GP). A drawing of experiments has been made in order to determine the empirical correlations between the quality of surface finish and the cutting force. Genetic programming method has been applied to derive empirical relationship of the surface finish and cutting force values for steel material. These relationships have been applied to develop the proposed evolution simulation model in which the cutting force is adjusted to improve the required surface quality. Findings: The system eliminates the problems related to assurance of quality of machining, efficiency of machining and prevention of tool damages. Research limitations/implications: While force control approach performed satisfactorily in a laboratory environment, it can be generally concluded that their implementation should be dictated by the economics of the production environment. Practical implications: The results provide a means of greater efficiency by improving the surface quality, minimizing the effect of the process variability and reducing the error cost in finishing operations. Originality/value: An adaptive system of control which controls the cutting force and maintains constant roughness of the machined surface during milling by continuous dynamic adjustment of the cutting parameters is devolped.

Słowa kluczowe

EN

machining; model-based control system; genetic programming

PL

obróbka skrawaniem; programowanie genetyczne; model systemów kontroli

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2008
• Tom: Vol. 26, nr 2
• Strony: 179--182
• Opis fizyczny: Bibliogr. 14 poz., tab., wykr.

Twórcy

autor

Cus F.

autor

Zuperl U.

• Faculty of Mechanical Engineering, University of Maribor, Smetanova 17, 2000 Maribor, Slovenia,

Bibliografia

• [1] U. Zuperl, F. Cus and M. Milfelner, Fuzzy control strategy for an adaptive force control in end-milling, Journal of Materials. Processing Technology 164-165 (2005) 1472-1478.
• [2] J. Kopac, M. Sokovic, Cutting properties of the PVD and CVD coatings on the ceramic substrates, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 278-285.
• [3] F. Cus, U. Zuperl, E. Kiker and M. Milfelner, Adaptive controller design for feedrate maximization of machining process, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 237-240.
• [4] C. Chen, M. Zhibin, An intelligent approach to non-constant feed rate determination for high-performance 2D CNC milling, International Journal of Manufacturing Technology and Management 9 (2006) 219-236.
• [5] G. Stute, F. R. Goetz, Adaptive Control System for Variable Gain in ACC Systems, Proceedings of the Sixteenth International Machine Tool Design and Research Conference, Manchester England (1975) 117-121.
• [6] M. Tomizuka, J. H. Oh, D. A. Dornfeld, Model Reference Adaptive Control of the Milling Process, Proceedings of the Symposium on Manufacturing on Manufacturing Process and Robotic Systems, New York (1983) 55-63.
• [7] S. J. Huang, C. C. Lin, A self-organising fuzzy logic controller for a coordinate machine, International Journal of Advanced Manufacturing Technology 19 (2002) 736-742.
• [8] W. Grzesik, J. Rech and T. Wanat, Surface integrity of hardened steel parts in hybrid machining operations, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 367-370.
• [9] S. Zhang, A. Xing, L. Jianfeng and F. Xiuli, Failure analysis on clamping bolt of milling cutter for high-speed machining, International Journal of Machining and Machinability of Materials 1 (2006) 343-353.
• [10] J. Kopac, Influence of high speed cutting on the structure of machined high speed steel material, Proceedings of the 11th Scientific Conference on Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2005, (2005) 40-44, (CD-ROM).
• [11] L. A. Dobrzański, K. Gołombek, J. Kopac and M. Sokovic, Effect of depositing the hard surface coatings on properties of the selected cemented carbides and tool cermets, Journal of Materials Processing Technology 157-158 (2004), 04-311.
• [12] J. Balic, Optimization of cutting process by GA approach, Robotics Computer Integrated Manufacturing 19 (2003) 113-121.
• [13] M. Sokovic, M. Cedilnik and J. Kopac, Use of 3D-scanning and reverse engineering by manufacturing of complex shapes, Proceedings of the 13th Scientific International Conference „Achievements in Mechanical and Materials Engineering”, AMME'2005, Gliwice-Zakopane, 2005, 601-604.
• [14] E. C. Lee, C. Y. Nian, Y. S. Tarng, Design of a materials processing technologies, Archives of Materials Science and Engineering 28/1 (2007) 48-56.