Examination of the effect of slitting roller shape on band slitting during the multi slit rolling process

• Autorzy: Mróz S.
• Języki publikacji: EN

Abstrakty

EN

Purpose: Basing on the results of computer simulations, it will be possible to choase proper technological parameters for the slitting rollers (such as shape), which will assure the slitting of the band and verify the force parameters. Design/methodology/approach: Using FEM-based computer programs for solving the problems of the theory of plasticity enables determining the force parameters during the band separation and enabled also the determination of the tools abrasive wear. Findings: Longitudinal band separation depends on the shape of the used slitting rollers. Increasing the roller opening angle has an effect on the force parameters and on the tools abrasive wear. Practical implications: The use of commercial software applications in the design of process technologies will allow for the development of a multi slit rolling technology with a minimum number of laboratory and industrial trials. Originality/value: Using the cracking (element removal) algorithm implemented in the Forge3® program, it was possible to carry out the numerical modiling of the proces for rolling with band slitting.

Słowa kluczowe

EN

numerical techniques; FEM; slitting rollers; Multi Slit Rolling (MSR) process

PL

techniki numeryczne; proces MSR

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2008
• Tom: Vol. 26, nr 2
• Strony: 167--170
• Opis fizyczny: Bibliogr. 15 poz., wykr.

Twórcy

autor

Mróz S.

• Częstochowa University of Technology, Al. Armii Krajowej 19, 42-200, Częstochowa, Poland,

Bibliografia

• [1] G. M. Shulgin, O. V. Dubina, Teoria i praktyka procesja mnogorucjevoj prokatki-razdielenija, Doneck, 2003 (in Russian).
• [2] G. M. Shulgin, A. G. Manshilin, Sozdanije i promyshlennaja realizacija vysokoekoeffektivnykh resursosberegajushchykh tekhnologii, osnovannykh na primenenii procesja-mnogorucevaja prokatka-razdelenije, Metall i Litje Ukrainy 3-4 (2003) 1-52 (in Russian).
• [3] M. Michałowski, S. Turczyn, The possibilities of longitudinal strip partition „Slit rolling” application in the process of long product rolling, Proceedings of Conference Walcownictwo'99, Ustroń, 1999, 121-126 (in Polish).
• [4] S. Mróz, A. Stefanik, H. Dyja, The application of the inverse method for determination of slitting criterion parameter during multi slit rolling (MSR) process, Journal of Materials Processing Technology 177 (2006) 493-496.
• [5] S. Mróz, P. Szota, H. Dyja, Numerical Modeling of Rolling Process Using Longitudinal Slitting Passes, Iron and Steel Technology 10 (2005) 40-49.
• [6] A. Kawałek, The analysis of the asymmetric plate rolling process, Journal of Achievements in Materials and Manufacturing Engineering 23/2 (2007) 63-66.
• [7] P. Szota, H. Dyja, Numerical modeling of the bimetallic reinforcement bar rolling process, Journal of Achievements in Materials and Manufacturing Engineering 25/1 (2007) 55-58.
• [8] S. Mróz, K. Jagieła, H. Dyja, Determination of the energy and power parameters during groove-rolling, Journal of Achievements in Materials and Manufacturing Engineering 22/2 (2007) 59-62.
• [9] L. A. Dobrzański, A. Śliwa, W. Kwaśny, W. Sitek, The computer simulation of stresses in the Ti+TiC coatings obtained in the PVD process, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 241-244.
• [10] I. S. Kim, J. S. Son, H. J. Kim, B. A. Chin, A study on variation of shielding gas in GTA welding using finite element method, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 249-252.
• [11] I. H. Son, Y. G. Jin, Y. T. Im, Finite element investigations of friction condition in equal channel angular extrusion, Journal of Achievements in Materials and Manufacturing Engineering 17 (2006) 285-288.
• [12] P. Šimecek, D. Hajduk, Prediction of mechanical properties of hot rolled steel products, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 395-398.
• [13] T. Da Sisva Botelho, E. Bayraktar, G. Inglebert, Comparison of experimental and simulation results of 2D-draw-bend springback, Journal of Achievements in Materials and Manufacturing Engineering 18 (2006) 275-278.
• [14] FORGE3® Reference Guide Release 6.2, Sophia-Antipolis, 2002.
• [15] M. Cockroft, D. Latham, Ductility and the workability of metals, Journal of the Institute of Metals 96, 1968, 33-39.