Properties of the multicomponent and gradient PVD coatings

• Autorzy: Dobrzański L. A. , Żukowska L. W.
• Języki publikacji: EN

Abstrakty

EN

Purpose: This paper presents investigation results of the properties of the multicomponent (Ti,Al)N and gradient Ti(C,N) wear resistant coatings, deposited with the PVD process onto the substrate from the cemented carbides, cermets and Al2O3 + TiC type oxide tool ceramics. Design/methodology/approach: The methodology includes analysis of the mechanical and functional properties. The Ra parameter was assumed to be the value describing surface roughness. The microhardness tests using the Vickers method were made with use of dynamic ultra microhardness tester. The measurements were made in the "load-unload" mode. Tests of the coatings adhesion to the substrate material was made with use of the scratch test. Surface roughness tests were done both before depositing the coatings and after completing the PVD process. Cutting properties of the investigated materials were determined based on the technological continuous cutting tests of the EN-GJL-250 grey cast iron. Findings: Main properties of the investigated materials were introduced. It has been stated, that properties of the cemented carbides, cermets and oxide tool ceramics with deposited multicomponent (Ti,Al)N and gradient Ti(C,N) PVD coatings increase in comparison with uncoated material. Multiple increase of tool life result among other things from almost double increase of microhardness of PVD coated materials in comparison with uncoated cemented carbides, cermets and oxide tool ceramics, increasing of thermal and chemical wear resistance and improving of chip formation and removing process' conditions. Practical implications: Pro-ecological dry cutting processes without the use of the cutting fluids and in the „Near-Net-Shape” technology. Originality/value: Application of multicomponent (Ti,Al)N and gradient Ti(C,N) types of coatings onto sintered tool materials in order to improve cutting properties of tools.

Słowa kluczowe

EN

tool materials; gradient coatings; cutting ability test; PVD

PL

materiały narzędziowe gradientowe; badanie skrawności

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2007
• Tom: Vol. 28, nr 10
• Strony: 621--624
• Opis fizyczny: Bibliogr. 15 poz., il., wykr.

Twórcy

autor

Dobrzański L. A.

autor

Żukowska L. W.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] L. A. Dobrzański, L. W. Wosińska, K. Gołombek, J. Mikuła, Structure of multicomponent and gradient PVD coatings deposited on sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 99-102.
• [2] L. A. Dobrzański, L. W. Wosińska, J. Mikuła, K. Gołombek, Multicomponent and gradient PVD coatings deposited on the sintered tool materials, Material Engineering 3-4 (157-158) (2007) 627-630.
• [3] L. A. Dobrzański, L. W. Wosińska, J. Mikuła, K. Gołombek, T. Gawarecki, Investigation of hard gradient PVD (Ti,Al,Si)N coating, Journal of Achievements in Materials and Manufacturing Engineering 24 (2007) 59-62.
• [4] L. A. Dobrzański, L. W. Wosińska, J. Mikuła, K. Gołombek, D. Pakuła, M. Pancielejko, Structure and mechanical properties of gradient PVD coatings, Journal of Material Processing Technology, (in Print).
• [5] T. Liu, C. Dong, S. Wu, K. Tang, J. Wang, J. Jia, TiN, TiN gradient and Ti/TiN multi-layer protective coatings on Uranium, Surface and Coating Technology 201 (2007) 6737-6741.
• [6] I. Yu. Konyashin, PVD/CVD technology for coating cemented carbides, Surface and Coatings Technology 71 (1995) 277-283.
• [7] X. Qiao, Y. Hou, Y. Wu, J. Chen, Study on functionally gradient coatings of Ti-Al-N, Surface and Coating Technology 131 (2000) 462-464.
• [8] L. A. Dobrzański, K. Gołombek, J. Mikuła, D. Pakuła, Improvement of tool materials by deposition of gradient and multilayers coatings, Journal of Achievements in Materials and Manufacturing Engineering 19 (2006) 86-91.
• [9] P. Panjan, I. Boncina, J. Bevk, M. Cekada, PVD hard coatings applied for wear protection of drawing dies, Surface and Coating Technology 200 (2005) 133-136.
• [10] W. Lengauer, K. Dreyer, Functionally graded hardmetals, Journal of Alloys and Compounds 338 (2002) 194-212.
• [11] R. Manaila, A. Devenyi, D. Biro, L. David, P. B. Barna, A. Kovacs, Multilayer TiAlN coatings with composition gradient, Surface and Coatings Technology, 151-152 (2002) 21-25.
• [12] M. Cłapa, D. Batory, Improving adhesion and wear resistance of carbon coatings using Ti:C gradient layers, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 415-418.
• [13] J. H. Lee, S. J. Lee, One-step-ahead prediction of flank wear using cutting force, International Journal of Machine Tools & Manufacture 39 (1999) 1747-1760.
• [14] K. Gołombek, L. A. Dobrzański, M. Sokovic, Properties of the wear resistant coatings deposited on the cemented carbides substrates in the cathodic arc evaporation process, Journal of Materials Processing Technology, 157-158 (2004) 341-347.
• [15] C. Y. H. Lim, S. C. Lim, K. S. Lee, Wear of TiC-coated carbide tools in dry turning, Wear 225-229 (1999) 354-367.