Corrosion resistance of multilayer and gradient coatings deposited by PVD and CVD techniques

• Autorzy: Dobrzański L. A. , Lukaszkowicz K. , Pakuła D. , Mikuła J.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of the research was the investigation of the corrosion resistance and structure of the TiN, TiN+multiTiAlSiN+TiN, TiN+TiAlSiN+TiN, TiN+TiAlSiN+AlSiTiN coatings deposited by PVD process and Ti(C,N)+TiN, Ti(C,N)+Al2O3+TiN, TiC+TiN, TiC+Ti(C,N)+Al2O3+TiN, TiN+Al2O3 coatings deposited by CVD process. Design/methodology/approach: Investigation of the electrochemical corrosion behavior of the samples in a PGP 201 Potentiostat/Galvanostat, in a three-electrode chamber, the metallographic examinations (SEM), the examinations of thin foils (TEM), texture analysis was done. Findings: It was found out that coatings deposited by PVD and CVD method display high corrosion resistance. The best results were obtained for the TiN+multiTiAlSiN+TiN coatings deposited by PVD process and TiC+Ti(C,N)+Al2O3+TiN coatings deposited by CVD process. Practical implications: The obtained results are the basis for the optimization of corrosion resistance of the PVD and CVD coatings deposited onto the substrate made from tool materials. Originality/value: The paper presents the influence of the coatings technology and of the number of layers on the corrosion resistance.

Słowa kluczowe

EN

corrosion; PVD; CVD; ceramic; tools materials

PL

korozja; materiały narzędziowe ceramiczne; CVD; PVD

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2007
• Tom: Vol. 28, nr 1
• Strony: 12--18
• Opis fizyczny: Bibliogr. 19 poz., il., wykr.

Twórcy

autor

Dobrzański L. A.

autor

Lukaszkowicz K.

autor

Pakuła D.

autor

Mikuła J.

• Division of Materials Processing Technology, Management and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland,

Bibliografia

• [1] L. A. Dobrzański, K. Lukaszkowicz, Erosion resistance and tribological properties of coatings deposited by reactive magnetron sputtering method onto the brass substrate, Journal of Materials Processing Technology 157-158 (2004) 317-323.
• [2] K. Bobzin, E. Lugscheider, M. Maes, P. W. Gold, J. Loos, M. Kuhn, High-performance chromium aluminium nitride PVD-coatings on roller bearings, Surface & Coatings Technology 188-189 (2004) 649-654.
• [3] K. Holmberg, A. Matthews, Coating Tribology, Elsevier, Amsterdam, 1994.
• [4] L. Cunha, M. Andritschky, L. Rebouta, K. Pischow, Corrosion of CrN and TiAlN coatingsin chloride-containing atmospheres, Surface & Coatings Technology 116-119 (1999) 1152-1160.
• [5] L. A. Dobrzański, K. Lukaszkowicz, A. Zarychta, L. Cunha, Corrosion resistance of multilayers coatings deposited by PVD techniques onto the brass substrate, Journal of Materials Processing Technology 164-165 (2005) 816-821.
• [6] S. Rossi, L. Fedrizzi, M. Leoni, P. Scardi, Y. Massiani, (Ti,Cr)N and Ti/TiN PVD coatings on 304 stainless steel substrates: wear-corrosion behaviour, Thin Solid Films 350 (1999) 161-167.
• [7] H. P. Feng, C. H. Hsu, J. K. Lu, Y. H. Shy, Effects of PVD sputtered coatings on the corrosion resistance of AISI 304 stainless steel, Materials Science and Engineering 347 (2003) 123-129.
• [8] W. Kajzer, M. Kaczmarek, A. Krauze, J. Marciniak, Surface modification and corrosion resistance of Ni-Ti alloy used for urological stents, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 123-126.
• [9] S. Kaciulis, A. Mezzi, G. Montesperelli, F. Lamastra, M. Rapone, F. Casadei, T. Valente, G. Gusmano, Multitechnique study of corrosion resistant CrN/Cr/CrN and CrN:C coatings, Surface & Coatings Technology 201 (2006) 313-319.
• [10] A. Kagiyama, K. Terakado, R. Urao, Effect of nitriding and TiN coating temperatures on the corrosion resistance of the combined surface modification layer, Surface and Coatings Technology 169-170 (2003) 397-400.
• [11] A. Hikmet, S. Sadri, The effect of PVD coatings on the corrosion behaviour of AZ91 magnesium alloy, Materials and Design 27 (2006) 1174-1179.
• [12] H. Altun, S. Sen, The effect of PVD coatings on the corrosion behavoiour of AZ91 magnesium alloy, Materials and Design 27 (2006) 1174-1179.
• [13] S. Karablov, M. A. M. Ibrahim, M. Yoshimura, Hydrothermal corrosion of TiAlN and CrN PVD films on stainless steel, Corrosion Science 47 (2005) 1839-1854.
• [14] D. Pakuła, Structure and properties of the multi-layer PVD and CVD wear-resistant coatings on the Si3N4 nitride tool ceramics, PhD Thesis, Silesian University of Technology, Faculty of Mechanical Engineering, Gliwice, Poland, 2003, (in Polish).
• [15] L. A. Dobrzański, Engineering Materials and Materials Design, Fundamentals of Materials Science and Physical Metallurgy, WNT, Warszawa, 2006 (in Polish).
• [16] L. A. Dobrzański, D. Pakuła, Structure and properties of the wear resistant coatings obtained in the PVD and CVD processes on tool ceramics, Materials Science Forum 513 (2006) 119-133.
• [17] L. A. Dobrzański, D. Pakuła, Comparison of the structure and properties of the PVD and CVD coatings deposited on nitride tool ceramics, Journal of Materials Processing Technology, 164-165 (2005) 832-842.
• [18] L. A. Dobrzański, L. Wosińska, K. Gołombek, J. Mikuła, Structure of multicomponent and gradient PVD coatings deposited on sintered tool materials, Journal of Achievements in Materials and Manufacturing Engineering 20 (2007) 99-102.
• [19] L. A. Dobrzański, D. Pakuła J. Mikuła, K. Lukaszkowicz, Corrosion resistance of coatings deposited by PVD and CVD techniques, Proceedings of the 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S'2005, Gliwice-Zakopane, 2005 (CD ROM).