Sensitivity Analysis of Design Parameters of Dynamic System

• Autorzy: Sapietová A. , Dekýš V. , Melicher R.
• Konferencja: Polish-Slovak Scientific Conference on Machine Modeling and Simulation - MMS 2010 (15 ; 31.08-1.09.2010 ; Krasiczyn, Poland)
• Języki publikacji: EN

Abstrakty

EN

Nowadays computational techniques utilization is essential part of the technical development. Visual form of data acquisition from simulations or solving of technical problems is the most effective approach. In the field of computer-aided design (CAD) 3D graphic visualization is certainty because makes it possible to design a very complicated parts and devices at a short time. Furthermore it enable to trace how these parts behave during operating regimes and make an optimization of required parameters. In this paper the engineering design of gravity orienting part tool for cylindrical bushing will be presented. Each of 3D components was designed in CAD software Pro/ENGINEER and in simulation software MSC.ADAMS virtual prototype was created. Using of the tools of parametric analysis for precising of model parameters in software MSC. ADAMS it was realized the optimization of chosen design and dynamic parameters of given designed system.

Słowa kluczowe

EN

MSC Adams; Pro/ENGINEER software; 3D graphic visualization

PL

MSC Adams; oprogramowanie Pro/ENGINEER; graficzna wizualizacja 3D

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2010
• Tom: Vol. 34, No. 4
• Strony: 88--95
• Opis fizyczny: Bibliogr. 2 poz., il., wykr.

Twórcy

autor

Sapietová A.

autor

Dekýš V.

autor

Melicher R.

• University of Žilina,

Bibliografia

• Sága, M. et al., 2009, Vybrané metódy analýzy a syntézy mechanických sústav, vyd. Žilina: VTS pri Žilinskej univerzite v Žiline.
• MSC.ADAMS, 2005 r2 manual.