Some Notes on Analysis of Bending and Torsion Combined Loading

• Autorzy: Jakubovičová L. , Sága M. , Kopas P. , Handrik M. , Vaško M.
• Konferencja: Polish-Slovak Scientific Conference on Machine Modeling and Simulation - MMS 2010 (15 ; 31.08-1.09.2010 ; Krasiczyn, Poland)
• Języki publikacji: EN

Abstrakty

EN

The purpose of this paper is to present procedure of stress and strain distribution analyses at the testing sample. Experimental device is designed for combined bending - torque loading. Structural design of the equipment allows loading by constant turn of the clamping parts. The stress and strain magnitude in test sample depends on the shape and material sample. To obtain the exact solution of the stress and strain values is generally very difficult and therefore for their specification was used FE method and experimental measurement using optical system ARAMIS.

Słowa kluczowe

EN

computational analysis; experimental analysis; torsion loading; bending loading; stress analysis; strain analysis; FEM; system ARAMIS

PL

analiza obliczeniowa; analiza eksperymentalna; skręcanie załadunku; gięcia załadunku; analiza naprężeń; MES (metoda elementów skończonych); system ARAMIS

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2010
• Tom: Vol. 34, No. 3
• Strony: 97--105
• Opis fizyczny: Bibliogr. 7 poz.

Twórcy

autor

Jakubovičová L.

autor

Sága M.

autor

Kopas P.

autor

Handrik M.

autor

Vaško M.

• University of Žilina, Faculty of Mechanical Engineering

Bibliografia

• Bathe, K. J., 1982, Finite element Procedures, Jersey, Prentice Hall.
• Dekýš, V., Melicger, R., Kučera, Ľ., Jurák, L., 2009, OpticalDeformation Measurements in Mechanical Engineering, Machine modeling and simulations,Horný čov, 209-214.
• Handrik, M., Kopas, P., Dekyś, V., 2006, Contribution to modelling and analyzing the stress by FE method with respect to accidental distribution of inclusions in structure, Nonconventional technology, Žilina, Slovak republic, full text on CD, p. 8.
• Kopas, P., Handrik, M., Sága, M., Vaško, M., 2006, Modelling and analyzing strain contribution in nodular cast iron, Computational Mechanics, Proceedings, vol. I, Castle Nectiny, Czech Republic, 273-280.
• Sapietová, A., Udvorka, A., Dekýš, V., 2009, Dynamic Analysis of Test Stand in MSC. ADAMS. Machine modeling and simulations, Horny Vadicov, 179-186.
• Skočovský, P., Vaško, A., 2004, Kvalitativne hodnotenie struktury liatin, 1 edition, EDIS, Żilina, p. 122.
• Udvorka, A., 2009, PhD thesis, University of Žilina.