Research on Phenomena Occurring in the Contact Area between the Toothed Belt and the Toothed Pulley

• Autorzy: Domek G.
• Konferencja: Polish-Slovak Scientific Conference on Machine Modeling and Simulation - MMS 2010 (15 ; 31.08-1.09.2010 ; Krasiczyn, Poland)
• Języki publikacji: EN

Abstrakty

EN

While designing timing belt much attention should be paid to selection of materials, which have significant influence on mechanical properties of belts. Depending on application: transmission, conveying or controlling, is different meshing in gear. The work presents constructional features of transmission timing belts depending on materials used for their production. Design of composites and usage of new polymer materials allows for improvement of constructional properties of belts. Modern timing belts should not only be durable or effective but also safe for users and their environment.

Słowa kluczowe

EN

timing belts; timing pulleys; synchronous drives

PL

paski rozrządu; koła pasowe; napęd synchroniczny

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2010
• Tom: Vol. 34, No. 3
• Strony: 63--68
• Opis fizyczny: Bibliogr. 10 poz., il., wykr.

Twórcy

autor

Domek G.

• Kazimierz Wielki University in Bydgoszcz, Institute of Technology,

Bibliografia

• Domek, G., Krawiec, P., 2007, New perspective of applying gear with timing belts in drive and control systems, Technologia i Automatyzacja Montażu, 4, 15-19.
• Domek, G., Malujda, I., 2007, Modeling of timing belt construction, Wiley Inter Science PAMM, Vol. 7, Issue 1, December 2007, 4070045-4070046.
• Dresig, H., Holzweissig, F., 2010, Dynamics of Machinery, Theory and Applications, Springer Verlag.
• Dudziak, M., 1993, New aspects od driving rubber belts life determination, Zagadnienia Eksploatacji Maszyn, zeszyt 4, 455-469.
• Dudziak, M., 1990, About internal friction problems and energy dissipation in rubber power transsmision belts, Rozprawy, nr 229, p. 167, Politechnika Poznańska.
• Dudziak, M., 1997, Directions in development of flexible connector belts design, In: Modelling and Simulation in Machinery Productions, Proceedings of Inter. Conference „Modelling and Simulation in Machinery Productions” Puchov, Slovakia.
• Dudziak, M., Domek, G., 2008, Mechanics of bending of timing belts with non straight teeth, The Tenth Pan American Congress of AppliedMechanics, XPACAM' 08, 12, 215-218, Cancun.
• Dudziak, M., Domek, G., 2008, Model of load in timing belts, The Tenth Pan American Congress of Applied Mechanics, X PACAM' 08, 12, 219-222, Cancun.
• Dudziak, M., Domek, G., Kołodziej, A., 2010, "Modelling of constructional feautures of timing belts made of materiale with macromolecular structures, XI PACAM" 10, Sao Carlos, SP, Brasil.
• Movlasada, P. S., 2006, Leistungssteigerung von Synchronriemenantrieben durch Parallelschaltung von Schlupf- und Zahnriemengetrieben, Dyssertation, Technischen Universitat Bergakademie Freiberg.