Toothing Deviations in the Single-Stage Gear Transmission

• Autorzy: Dyk J.
• Konferencja: International Conference on Modelling and Simulation of the Friction Phenomena in the Physical and Technical Systems "FRICTION 2008" (5 ; 31.05-1.06.2008 ; Warsaw, Poland) ; French-Polish Seminar of Mechanics (16 ; 31.05-1.06.2008 ; Warsaw, Poland)
• Języki publikacji: PL

Abstrakty

EN

A description of the toothing deviations in mesh is discussed. In our scope there are the base pitch errors and the functions, which may be created by use of them, and also the other errors, which can influence significantly on the gears dynamics. On the basis of the modified Muller's model of the single-stage gear transmission a simplified way of modelling of the majority of these toothing deviations is shown. It is possible to take into the consideration the interactions between some kinds of the errors in mesh. The frequency analysis of the dynamic forces for the case of the gears with errors and without deviations is also performed.

Słowa kluczowe

PL

model Mullera; przekładnia zębata; uzębienie przekładni

EN

Muller model; gear transmission; toothing errors; meshing errors

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2008
• Tom: Vol. 32, No. 1
• Strony: 33--45
• Opis fizyczny: Bibliogr. 10 poz., wykr.

Twórcy

autor

Dyk J.

• Warsaw University of Technology. Institute of Machine Design Fundamentals,

Bibliografia

• Dąbrowski, Z., Radkowski, S., Wilk, A., 2000, Dynamics of Gears - Research and simulation in an operational orientated design (original title in Polish: Dynamika przekładni zębatych. Badania i symulacja w projektowaniu eksploatacyjnie zorientowanym), Warszawa - Katowice - Radom.
• Dyk, J,. 2005, Tooth Friction in Models of Gears, Machine Dynamics Problems, 29, No 1, 5-19.
• Müller, L, 1986, Gears: Dynamics (original title in Polish: Przekładnie zębate: Dynamika), WNT, Warszawa.
• Niemann, G., Baethge, J., 1970, Drehwegfehler, Zahnfederhärte und Geräusch bei Stirnrädern. Einfluss der Zahnform und Zahnfehler bei Belastung nach Theorie und Versuch, Teil 1, VDI-ZBand 112, Nr 4, 205-276.
• Ochęduszko, K., 1974, Toothed wheels: Verification (original title in Polish: Koła zębate: Sprawdzanie), 3, WNT, Warszawa.
• Seireg, A., Houser, D.R., 1970, Evaluation of Dynamic Factors for Spur and Helical Gears, Transactions of the ASME, Journal of Engineering for Industry, 504-515.
• Umezawa, K., Sato, T., Ishikawa, J., 1984, Simulation on Rotational Vibration of Spur Gears, Bulletin of JSME, 27, No 223, 102-109.
• Yermakov, S.M., 1971, Monte Carlo Method and Related Issues, Moscow, Nauka, (in Russian).
• PN-ISO 1328-1, 2000, Cylindrical gears - ISO system of accuracy - Part 1, Definitions and allowable values od deviations relevant to corresponding flanks of gear teeth.
• PN-ISO 6336-1, 2000, Calculation of load capacity of spur and helical gears - Part 1, Basic principles, introduction and general influence factors.