PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wyznaczanie średniej nieelastycznej drogi swobodnej elektronów w wybranych stopach binarnych za pomocą elektronowej spektroskopii piku elastycznego (EPES)

Identyfikatory
Warianty tytułu
EN
Determination of the inelastic mean free path of electrons in selected binary alloys by elastic peak electron spectroscopy (EPES)
Konferencja
II Kongres Towarzystwa Próżniowego ; 13-17.05.2001 ; Warszawa, Polska
Języki publikacji
PL
Abstrakty
EN
While inelastic mean free paths of electrons (IMFPs) for different energies can be calculated for alloys from predictive formulae, IMFPs can be experimentally measured by the elastic peak electron spectro­scopy (EPES). In this method, experimentally determined ratios of elastically backscattered electrons from test surfaces and from a reference material are compared with the values evaluated from Monte Carlo calculations. The paper is dealing with the experimental determination of the IMFP in selected binary alloys, i.e. AuxCu100-x (x = 25, 50, 75 at.%) and AuxPd100-x (x= 10, 50, 90 at.%) within the 200-2000 eV range. The data were recorded using the DCMA-PHI15-255G spectrometer. Surface composition of the alloy samples was investigated prior to and after the EPES measurements by x-ray photoelectron spectroscopy (XPS) using an ESCALAB 210 spectrometer. The relative EPES measurements were performed with use of an Au standard. The measured IMFPs were compared with IMFPs calculated from the TPP-2M predictive formula of Tanuma et al. The scatter between the measured IMFPs and calculated from the predictive formula has been statistically analysed.
Rocznik
Strony
66--67
Opis fizyczny
Bibliogr. 23 poz., tab., wykr.
Twórcy
autor
  • Zakład Fizykochemii Powierzchni, Instytut Chemii Fizycznej, Polska Akademia Nauk, Warszawa, mikra@ichf.edu.pl
Bibliografia
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWA9-0003-0031
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.