Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Konferencja
International Conference on Modelling in Mechatronics (9 ; 02-04.09.2004 ; Kazimierz Dolny, Poland)
Języki publikacji
Abstrakty
The article deals with possibilities of preparation of titanium alloys based on intermetallic phases from the system Ti-Al. Production of the TiAl alloys is difficult because of the reactivity of titanium. Therefore the alloys were prepared in plasma furnace and vacuum furnace. The preparation by these two various furnaces resulted in two different types of microstructures. The differences in microstructures of alloys were observed. Obtained microstructures were described and analysed. Measurement of hardnesses alloys and particular phases were performed.
Czasopismo
Rocznik
Tom
Strony
115--120
Opis fizyczny
Bibliogr. 4 poz.
Twórcy
autor
- VŠB - Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering
autor
- VŠB - Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering
Bibliografia
- Dembovský, V., 1978, Plazmová metalurgie, Praha, SNTL.
- Lee, H.N., 2002, Directional solidification and creep deformation of a Ti-46Al-1.5Mo-0.2C(%) alloy, Intermetallics, 10(9), pp. 841-849.
- Saufhoff, G., 1995, Intermetallics, Weinheim, VCH Verlagsgesellschaft mbH.
- Szkliniarz, W., 2002, Wytwarzanie stopów na osnowie faz międzymetalicznych z układu Ti-Al, Tytan i jego stopy, Częstochowa, Poland, VII Ogólnopolskie Sympozjum, 167-173.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWA2-0008-0249