Structure of Titanium Alloys from System Ti-Al Prepared in Plasma Furnace and Vacuum Furnace

• Autorzy: Smíšek V. , Kursa M.
• Konferencja: International Conference on Modelling in Mechatronics (9 ; 02-04.09.2004 ; Kazimierz Dolny, Poland)
• Języki publikacji: EN

Abstrakty

EN

The article deals with possibilities of preparation of titanium alloys based on intermetallic phases from the system Ti-Al. Production of the TiAl alloys is difficult because of the reactivity of titanium. Therefore the alloys were prepared in plasma furnace and vacuum furnace. The preparation by these two various furnaces resulted in two different types of microstructures. The differences in microstructures of alloys were observed. Obtained microstructures were described and analysed. Measurement of hardnesses alloys and particular phases were performed.

Słowa kluczowe

EN

intermetallic alloys; titanium alloys; plasma furnace; vacuum furnace microstructures

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2004
• Tom: Vol. 28, No. 4
• Strony: 115--120
• Opis fizyczny: Bibliogr. 4 poz.

Twórcy

autor

Smíšek V.

• VŠB - Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering

autor

Kursa M.

• VŠB - Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering

Bibliografia

• Dembovský, V., 1978, Plazmová metalurgie, Praha, SNTL.
• Lee, H.N., 2002, Directional solidification and creep deformation of a Ti-46Al-1.5Mo-0.2C(%) alloy, Intermetallics, 10(9), pp. 841-849.
• Saufhoff, G., 1995, Intermetallics, Weinheim, VCH Verlagsgesellschaft mbH.
• Szkliniarz, W., 2002, Wytwarzanie stopów na osnowie faz międzymetalicznych z układu Ti-Al, Tytan i jego stopy, Częstochowa, Poland, VII Ogólnopolskie Sympozjum, 167-173.