Modelling of Eletromagnetic Actuators for the Intake & Exhaust Valves of Automobile Engines

• Autorzy: Nitu C. , Nitu S. , Gramescu B. , Alionte C.
• Konferencja: International Conference on Modelling in Mechatronics (9 ; 02-04.09.2004 ; Kazimierz Dolny, Poland)
• Języki publikacji: EN

Abstrakty

EN

The main objective of the work was the development of a distribution system for thermal engines, electrically actuated and electronically controlled, aimed to replace the classical system with cam-follower mechanism. The work consisted of design, modelling and simulation of an electromagnetic actuator, able to drive a valve with certain dynamic performances, within the desired stroke and development of an experimental system including electronic control and software.

Słowa kluczowe

EN

mechatronics; electromagnetic actuator; computer control

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2004
• Tom: Vol. 28, No. 4
• Strony: 47--53
• Opis fizyczny: Bibliogr. 2 poz.

Twórcy

autor

Nitu C.

• Department of Precision Mechanics and Mechatronics University "POLITEHNICA" of Bucharest

autor

Nitu S.

• Faculty of Electrical Engineering University "POLITEHNICA" of Bucharest

autor

Gramescu B.

• Department of Precision Mechanics and Mechatronics University "POLITEHNICA" of Bucharest

autor

Alionte C.

• Department of Precision Mechanics and Mechatronics University "POLITEHNICA" of Bucharest

Bibliografia

• Saber, W., Kemper, H., Van der Stay, F., Esch, T., 2001, Der elektromechanische Ventiltrib - Systembaustein für zukünftige Antriebskonzepte, MTZ Motorzeitschrift, 62(1), 44-55.
• Tai, C., Stubbs, A., Tsao, T.-C., 2001, Modeling and Controller Design of an Electromagnetic Engine Valve, Proceedings of the American Control Conference Arlington, 2890-2895.