Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Konferencja
International Conference on Modelling in Mechatronics (9 ; 02-04.09.2004 ; Kazimierz Dolny, Poland)
Języki publikacji
Abstrakty
The paper deals with different (matrix) glasses reinforced with coated Nextel 440 fibers. The mechanical properties of the composite materials depend strongly on the thermal expansion difference between matrix and fiber and on the type of fiber coating. A fiber pullout during loading is desired in order to get a damage tolerant behaviour. But not each from the mechanical point of view successful fiber/matrix pair is suitable for a transparent composite. Such a transparent composite demands fibers and a matrix glass with adapted refractive index, without internal stress and holes, and fiber coating which does not influence the optical transmission in the visible wavelength range. The Nextel 440 fiber (produced by 3 M) and the code 8650 matrix glass (produced by Schott) are fitted components. The coating should be a double layer for sliding and protecting. Moreover a hot pressing process in oxydizing atmosphere is helpful.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
131--137
Opis fizyczny
Bibliogr. 10 poz.
Twórcy
autor
- Ilmenau Technical University
autor
- Ilmenau Technical University
autor
- Ilmenau Technical University
autor
- Ilmenau Technical University
Bibliografia
- [1] Boccaccini, A.R., Trusty, P.A., 1996, Toughening and Strengthening of glass by Al203 Platelets, J. Mat. Sci. Lett. 15, 60-63.
- [2] Bright, J.D., Shetty, D.W., Griffin, C.W., Limaye, S.Y., 1989, Interfacial Bonding and Friction in Silicon Carbide (Filament)-Reinforced Ceramic- and Glass-Matrix Composites, J. Am. Ceram. Soc. 72 (10), 1891-1898.
- [3] Chawla, K.K., 1993, Ceramic Matrix Composites, Chapman and Hall, London.
- [4] Fehling, P. et al., 2003, Filling in a gap in the property profile of glass composites, ICCM-14, CMCs session, San Diego/CA, proceedings, p. 82.
- [5] Heinz, J., Beier, W., Pannhorst, W., Petzold, J., 1995, Faserverstarkte Gläser - Herstellung, Eigenschaften, Anwendungen, in: Verbundwerkstoffforschung (edited by J. Bossert, N. Clausen, R. Nitsche), Expert-Verlag Renningen-Malmsheim, 1-25.
- [6] Iba, H., Chang, T. et al., 1996, Fabrication of Optically Transparent Short-Fiber-Reinforced Glass Matrix Composites, J. Am. Ceram. Soc. 79, 881-884.
- [7] Leutbecher, T., Hülsenberg, D., 2000, Oxide Fiber Reinforced Glass, Advanced Engineering Materials, 2 (3), 93-99.
- [8] Leutbecher, T., 2002, Beitrag zur Entwicklung von oxidfaserverstarkten Gläsern, Doctor thesis, TU Ilmenau, Shaker Verlag, p. 98.
- [9] Sambell, R.A.J., Bowen, D.H., Phillips, D.C., 1972, Carbon Fibre Composites with Ceramic and Glass Matrices, Part I: Discontinuous Fibres, J. Mat. Sci. 7, 663-675.
- [10] Weise, K., Stöckel, S., Winkler, M., Nestler, K., Marx, G., 2001, Verbundwerkstojfe und Werkstoffverbunde, edited by B. Wielage and G. Leonhard, Wiley-VCH, Weinheim, 359-364.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWA2-0008-0226