Problems of Evaluating Quality of Convex Printouts for the Blind and Partially Sighted People

• Autorzy: Barczyk R. , Buczyński L.
• Konferencja: International Conference on Modelling in Mechatronics (9 ; 02-04.09.2004 ; Kazimierz Dolny, Poland)
• Języki publikacji: EN

Abstrakty

EN

The paper describes experimental studies related to evaluating quality of convex printouts for the blind, performed in the Institute of Micromechanics and Photonics, Warsaw University of Technology. There are discissed chosen parameters of the printouts, methodologies of performing the measurements and exemplary results of the experimental studies.

Słowa kluczowe

EN

visually impaired people; convex printing

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2004
• Tom: Vol. 28, No. 3
• Strony: 15--20
• Opis fizyczny: Bibliogr. 2 poz.

Twórcy

autor

Barczyk R.

• Warsaw University of Technology, Institute of Micromechanics and Photonics

autor

Buczyński L.

• Warsaw University of Technology, Institute of Micromechanics and Photonics

Bibliografia

• [1] Barczyk, R., 2003, Analysis of Quality Parameters of Convex Printouts for the Blind, Master's thesis advisted by Buczyński L., Faculty of Mechatronics, Warsaw University of Technology, Warsaw (in Polish).
• [2] Buczyński, L., 2003, Quality Parameters of 3D Convex Printouts for the Blind, and Influence of the Copying Machine and Features of the Image on the Quality of Convex Copies, Proceedings of the European Conference devoted to the Blind and Partially Sighted People, Owińska (in Polish).