On Application of Fuzzy Logic in Active Control of Truck Driver's Seat

• Autorzy: Krzyżyński T. , Maciejewski I. , Chamera S.
• Konferencja: German-Polish Workshop on Dynamical Problems in Mechanical Systems (8 ; 31.08-5.09.2003 ; Schmochtitz, Germany)
• Języki publikacji: EN

Abstrakty

EN

The paper contains mathematical model of active control of truck driver seat suspension. Serial produced seat with a passive pneumatic suspension, that vibroisolation properties became improved by active control, is the object of simulation. Distributing element in this case is a flow proportional valve, receiving signal from fuzzy controller. Simulation has been carried out using of real excitations obtained during measurement of the truck floor vibrations. As results of computer simulations sample courses of acceleration and displacement for seat active suspension have been presented in comparison with those measured on the truck floor.

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2004
• Tom: Vol. 28, No. 1
• Strony: 91--100
• Opis fizyczny: Bibliogr. 5 poz.

Twórcy

autor

Krzyżyński T.

• Technical University of Koszalin, Departament of Mechanical Engineering

autor

Maciejewski I.

• Technical University of Koszalin, Departament of Mechanical Engineering

autor

Chamera S.

• Technical University of Koszalin, Departament of Mechanical Engineering

Bibliografia

• 1. Gere, E.W., 1973, Pneumatic drives. Theory and calculation, WNT, Warsaw.
• 2. Osiński, Z., 1997, Damping of vibrations, PWN, Warsaw.
• 3. Piegat, A., 1999, Fuzzy modeling and control, EXIT. Warsaw.
• 4. Tarnowski, W., 2001, Designing systems of automatic control, Technical University Press, Koszalin.
• 5. Yager, R.R., Filev D.P., 1995, Foundations of fuzzy modeling and control, WNT, Warsaw.