3D Tools Compensation Technology in (X, Y, Z, B, C) Style Five-Axis Linkage NC Manufacturing

• Autorzy: Quiang L. , Junxi B.
• Konferencja: Sino-Polish Conference on CAD in Machinery (12 ; 10.2003 ; Warsaw, Poland)
• Języki publikacji: EN

Abstrakty

EN

The article analyzed tools compensation of five-axis CNC machines tools whose tool axis has two degrees, and also the feed rate because of tools compensation has been discussed. The results have been applied in the five-axis CNC machines system of sky co. Nanjing.

Słowa kluczowe

EN

five-axis machining; tools compensation; CAD/CAM

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2003
• Tom: Vol. 27, No. 4
• Strony: 29--39
• Opis fizyczny: Bibliogr. 8 poz.

Twórcy

autor

Quiang L.

• College of Mechanical Engineering, Inner Mongolia Polytechnic University, Hohhot, China

autor

Junxi B.

• Inner Mongolia Polytechnic University, Hohhot, China

Bibliografia

• 1. Bingyin, R., Huaming, L., 1999, Cutter Location Optimization in 5-axis NC Machining of Freeform Surfaces with a Fiat-end Cutter, Journal of Harbin Institute Technology, 12(4).
• 2. Delin, Z., Bingyin, R., Huang, L., 1995, Error Analysis in the 4-axis NC Machining of Non-expandable Ruled-surface, Proceedings of the 7th Int. Manufacturing Conf in China, Harbin, July.
• 3. Farin,G., 1990, Curves and Surfaces for Computer Aided Geometrie Design - A Practical Guide (second edition), Academic Press.
• 4. Faux, F.D, Pratt, M.J., 1979, Computational Geometry for Design and Manufacture, Chichester, Ellis Horwood.
• 5. Kaldor, S., Rafael, A.M., Messinger, D., 1988, On the CAD of Profiles for Cutters and Helical Flutes - Geometrical Aspects, Annals of the CIRP, 37(1), 53-57.
• 6. Kang, S.K., Ehmann, K.F., Lin, C., 1996, A CAD Approach to Helical Groove Machining: Mathematical Model and Model Solution, Int. J. Mach. Tools Manufacture, 36(1), 141-153.
• 7. Sheth, D.S. et al., 1991, CAD/CAM for Geometry and Process Analysis of Helical Groove Machining.Annals of the CIRP, 39(1), 129-132.
• 8. Xing-jia guo, Bing-Yin Ren, Yu-Yong Tang et al., 1999, Geometry Models for improving NC Machining Efficiency and Accuracy of Propeller with a Constant Pitch, Journal of the Chinese Society of Mechanical Engineers, 20(5).