Use of Analytical Redundancy in Diagnosis of Fatigue-Related Processes

• Autorzy: Radkowski S. , Zawisza M.
• Języki publikacji: EN

Abstrakty

EN

Stress in a tooth that has not been destroyed contains information on the process of breaking of a tooth located at any place of the toothed wheel rim. Damage to a tooth leads to the increase of random amplitudes, and thus the information on the process should be sought in the measures that relate to the growth of effects of random impacts for which the function of intensity of the randomness of amplitudes, and thus of the information on the on-going process, should be sought in the measures that relate to the growth of effects of random impacts, for which the function of damage intensity is time-dependent.

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2003
• Tom: Vol. 27, No. 3
• Strony: 45--56
• Opis fizyczny: Bibliogr. 12 poz.

Twórcy

autor

Radkowski S.

• Institute of Machine Design Fundamentals, Warsaw University of Technology

autor

Zawisza M.

• Institute of Machine Design Fundamentals, Warsaw University of Technology

Bibliografia

• 1. Alawi, H., 1989, Fatigue Crack Growth Prediction Under Random Peaks and Sequence Loading, ASME Journal of Engineering Materials and Technology, 111, 339-344.
• 2. Basseville, M., Nikitorov, J.V., 1993, Detection of Abrupt Changes Theory and Application, Prentice Hall, Englewood Clitts, New Jersey.
• 3. Bolotin, V.V., 1996, Reliability Against Fatigue Fracture in the Presence of Set of Cracks, Engineering Fracture Mechanics, 53, No 5, 753-759.
• 4. Cempel, C., 1982, Fundamentals of vibroacoustic diagnosis of machines (original title in Polish: Podstawy wibroakustycznej diagnostyki maszyn), WNT, Warszawa.
• 5. Dąbrowski, Z., Radkowski, S., Wilk, A., 2000, Dynamics of toothed gears - Research and simulation in operation-oriented design (original title in Polish: Dynamika przekładni zębatych - Badania i symulacja w projektowaniu eksploatacyj nie zorientowanym), WiZPITE, Radom.
• 6. Dowling, N.E., 1983, Fatigue Lite Prediction for Complex Load Versus Time Histories, ASME Journal of Engineering Materials and Technology, 105, 207-214.
• 7. Gertler, J.J., 1998, Fault Detection and Diagnosis in Engineering System, Marcel Dekker, Inc. Nowy York, Bazylea.
• 8. Korbicz, J., Konieczny, J.M., Kowalczuk, Z., Cholewa, W., 2002, Process diagnosis (original title in Polish: Diagnostyka procesów), WNT, Warszawa.
• 9. Radkowski, S., 1995, Low-energy Components of Vibroacoustic Signal as the Basis for Diagnosis of Defect Formation, Machine Dynamics Problems, 12, Warsaw.
• 10. Radkowski, S., 2002, Reliability-oriented vibroacoustic diagnosis (original title in Polish: Niezawodnościowe - zorientowana diagnostyka wibroakustyczna), XX Zimowa Szkoła Niezawodności, Szczyrk.
• 11. Radkowski, S., Zawisza, M., 2003, Use of vibroacoustic signal in examination of the origin and development of fatigue-related cracks at the base of tooth's foot in a toothed gear (original title in Polish: Wykorzystanie sygnału wibroakustycznego w badaniu powstawania i rozwoju pęknięcia zmęczeniowego u postawy stopy zęba w przekładni zębatej), XXX Ogólnopolskie Sympozjum Diagnostyka Maszyn, Węgierska Górka.
• 12. Sanliturk, K.Y., 1992, Fatigue Lite Prediction Using Prediction Using Frequency Response Functions, Journal of Vibration and Acoustics, 114, 381-386.