PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Kompaktowy Solenoid Mionowy : perspektywa dekady

Autorzy
Identyfikatory
Warianty tytułu
EN
Compact Muon Solenoid : a decade of perspective
Języki publikacji
PL
Abstrakty
PL
Kompaktowy Solenoid Mionowy CMS jest jednym z głównych detektorów akceleratora LHC. Kompleks akceleratorowy w CERN został właśnie wyłączony na dwa lata, po dwóch latach eksploatacji, i zostanie ponownie uruchomiony w roku 2015. Podczas tej przerwy szereg jego elementów będzie podlegać intensywnej modernizacji. Nie tylko sam LHC, ale także elementy boostera i detektory. W szczególności zwiększona zostanie dwukrotnie jasność wiązki i energia zderzeń cząsteczkowych. Oznacza to ok. 10 krotnie większą jasność zintegrowaną, do poziomu ok. 250 lub nawet 300 fb-1/rok. Potencjał odkrywczy maszyny ulegnie znacznemu zwiększeniu. Ten potencjał będzie eksploatowany ponownie niemal bez przerwy przez dwa lata. Artykuł przedstawia wprowadzenie w tematykę badawczą akceleratora LHC oraz wybrane aspekty modernizacji detektora CMS. W budowę i modernizację CMS zaangażowana jest grupa warszawska z IFD WF UW, NCBJ oraz ISE WEiTI PW.
EN
The Compact Muon Solenoid CMS is one of the major detectors of the LHC accelerator. The second is Atlas. The accelerator complex in CERN has just be shut down for two years, after two years of exploitation, and will resume its work in 2015. During this brake, called long shutdown LS1 a number of the complex components will be intensely refurbished. Not only the LHC it-self but also the booster components and detectors. In particular, the beam luminosity will be doubled, as well as the colliding beam energy. This means tenfold increase in the integrated luminosity over a year to 250 fb-1/y. Discovery potential will be increased. This potential will be used for subsequent two years, with essentially no breaks, till the LS2. The paper presents an introduction to the research area of the LHC and chosen aspects of the CMS detector modernization. The Warsaw CMS Group is invoived in CMS construction, commissioning, maintenance and refurbishment. The Group consists of members form IFD WF UW, NCBJ and ISE WEiTI PW.
Rocznik
Strony
104--107
Opis fizyczny
Bibliogr. 34 poz.
Twórcy
  • Politechnika Warszawska, Instytut Systemów Elektronicznych
Bibliografia
  • [1] NuMi Collaboration, Fermilab, Demonstration of communication using neutrinos, arXiv: 1203.2847 [hep-ex].
  • [2] CMS Collaboration, The CMS experiment at the CERN LHC. Journal of Instrumentation, vol. 3, no. 8 (2008).
  • [3] CMS Collaboration, Upgrade of CMS detector through 2020, Technical Proposal, CERN-LHCC-2011-06, CMS UG-TP-1, CERN Geneve, 2 June 2011, 311 pages.
  • [4] Rossi L., Sutton CH., Szeberenyi A.: LHC upgrade: Superconductivity leads the way to high luminosity, CERN Courier, vol. 53, no. 1, pp. 28-31 (2013).
  • [5] Zagozdzinska A. i in.: TRIDAG systems in HEP experiments at LHC accelerator. Proc. SPIE 8698, art. no. 86980O, 10 pages (2012).
  • [6] Romaniuk R. S.: Review of EuCARD project on accelerator infrastructure in Europe. Proc. SPIE 8698, art. no. 86980Q, 10 pages (2012).
  • [7] Romaniuk R. S.: Free electron laser infrastructure in Europe. Proc. SPIE 8702, art. no. 87020 M (2013).
  • [8] Romaniuk R., Pozniak K.: Metrological aspects of accelerator technology and high energy physics experiments. Measurement Science and Technology, 18 (8), art. no. EOI (2008).
  • [9] Fąfara P. et al.: FPGA-based implementation of a cavity field controller for FLASH and X-FEL. Measurement Science and Technology, 18 (8), pp. 2365-2371 (2008).
  • [10] Ackerman W. et al.: Operation of a free-electron laser from the extreme ultraviolet to the water window. Nature Photonics, 1 (6), pp. 336-342 (2007).
  • [11] Czarski T. et al.: Superconducting cavity driving with fpga controller. Nuclear Instruments and Methods in Physics Research A, 568 (2), pp. 854-862 (2006).
  • [12] Czarski T. et al.: TESLA cavity modeling and digital implementation in fpga technology for control system development. Nuclear Instruments and Methods in Physics Research A, 556 (2), pp. 565-576 (2006).
  • [13] Czarski T. et al.: Cavity parameters identification for TESLA control system development. Nuclear Instruments and Methods in Physics Research A, 548 (3), pp. 283-297 (2005).
  • [14] Romaniuk R. S.: Accelerator infrastructure in Europe EuCARD 2011. International Journal of Electronics and Telecommunications 57 (3), pp. 413-419 (2011).
  • [15] Romaniuk R. S.: EuCARD 2010 accelerator technology in Europe. International Journal of Electronics and Telecommunications 56 (4), pp. 485-488 (2010).
  • [16] Koprek W. i in: Oprogramowanie dla systemu kontrolno-pomiarowego akceleratora TESLA. Elektronika, nr 1, 2005, str. 53-58.
  • [17] Poźniak K. T. i in.: Gigabitowy moduł optoelektroniczny dla systemu LLRF TESLA. Elektronika, nr 7, 2005, str. 55-60.
  • [18] Giergusiewicz W. i in.: Ośmiokanatowy system sterowania modułem akceleratora TESLA. Elektronika, nr 7, 2005, str. 51-55.
  • [19] Zabołotny W. i in.: Wbudowany system komputerowy jako sterownik płyt kontrolno-pomiarowych do sterowania LLRF w akceleratorze. Elektronika, nr 7, 2005, str. 61-64.
  • [20] Koprek W. i in.: Konfiguracja i pomiary systemu SIMCON ver. 2.1. Elektronika, nr 7, 2005, str. 40-44.
  • [21] Poźniak K., Romaniuk R., Kierkowski K.: Modularna platforma do systemu sterowania akceleratorem TESLA. Elektronika, 2005. z. 7. ss. 36-39.
  • [22] Koprek W. i in.: Sterowanie oraz akwizycja danych w systemie SIMCON 2.1. Elektronika, 2005. z. 7. ss. 45-50.
  • [23] Poźniak K. T., Czarski T. W., Romaniuk R. S.: System pomiarowo-kontrolny dla nadprzewodzącej, mikrofalowej wnęki rezonansowej akceleratora TESLA i europejskiego lasera XFEL. Kwartalnik Elektroniki i Telekomunikacji PAN, vol. 51, z. 1, str. 175-210, 2005.
  • [24] Romaniuk R. S. i in.: Optical network and FPGA/DSP based control system for free electron laser. Biuletyn PAN, Nauki Techniczne, vol. 53, no. 2, pp. 123-138, 2005.
  • [25] Strzałkowski P. i in.: Uniwersalny moduł sterowania LLRF do akceleratora liniowego FLASH. Elektronika, vol. 48, nr 7, str. 31-36, 2007.
  • [26] Bujnowski K. i in.: Konwerter skryptu MatLab na kod C do procesorów osadzonych w systemie LLRF akceleratora liniowego FLASH. Elektronika, vol. 48, no. 6, str. 19-22, 2007.
  • [27] Romaniuk R. S.: Development of accelerator technology in Poland. Kwartalnik Elektroniki i Telekomunikcaji PAN, vol. 54, no. 3, pp. 225-232, 2008.
  • [28] Romaniuk R. S.: EuCARD - Technika akceleratorowa w Europie. Elektronika, nr 07, 2010, str. 178-179.
  • [29] Lipiński M. i i n.: Uniwersalna Platforma Pomiarowa dla rozproszonego wirtualnego systemu pomiarowego. Elektronika, Vol. 52, no. 1, 2011, pp. 89-93 (2011).
  • [30] Romaniuk R. S.: EuCARD 2010 : Technika akceleratorowa w Europie EuCARD - Accelerator technology in Europe. Elektronika vol. 51, no. 8, pp. 178-179 (2010).
  • [31] Romaniuk R. S.: Infrastruktura akceleratorowa w Europie - EuCARD 2011 (Accelerator infrastructuree in Europe - EuCARD 2011). Elektronika, vol. 52, no.12, pp. 117-120 (2011).
  • [32] Romaniuk R. S.: Rozwój techniki akceleratorowej w Europie - EuCARD 2012, (Development of accelerator technology in Europe - EuCARD 2012). Elektronika, vol. 53, nr 9, 2012, str. 147-153.
  • [33] Romaniuk R. S.: Technika akceleratorowa i eksperymenty fizyki wysokich energii. Wilga 2012, (Accelerator technology and high energy physics experiments, Wilga 2012), Elektronika, vol. 53, nr 9, 2012, str. 162-169.
  • [34] Romaniuk R. S.: Fizyka fotonu i badania plazmy. Wilga 2012, (Photon physics and plasma research) Elektronika, vol. 53, nr 9, 2012, str. 170-176.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWA0-0057-0021
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.