Analysis of the Pitch Circle Runout in Involute Splined Connections

• Autorzy: Kroczak J. , Dudziak M. , Podolski T.
• Konferencja: French-Polish Seminar of Mechanics (19 ; 8-11.06. 2011 ; Perpignan, France)
• Języki publikacji: EN

Abstrakty

EN

The paper presents measuring methods of the pitch circle runout of involute splines and determination of the roundness deviation of the pitch circle from its runout results. The analysis of the influence of the runout on the tooth thickness, pitch and profile deviations is also shown. It was pointed out that the most characteristic roundness deviation is a pitch circle ovality of internal involute spline. This type of deviation often occurs for the parts with high hardness of material. The ovality is the reason for unequal contact depth of teeth and irregularity of interference or backlash.

Słowa kluczowe

EN

involute spline; form deviation; runout; ovality

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2011
• Tom: Vol. 35, No. 2
• Strony: 13--19
• Opis fizyczny: Bibliogr. 7 poz., wykr.

Twórcy

autor

Kroczak J.

autor

Dudziak M.

autor

Podolski T.

• Poznan University of Technology, Chair of Basics of Machine Design,

Bibliografia

• Cedoz R. W., Chaplin M. R., 1994, Design Guide for Involute Splines, SAE, Warrendale, PA.
• Dudley, D. W., 1967, How to design involute splines, McGraw-Hill Book Co., New York.
• Dudley, D. W., 1967, When splines need stress control, McGraw-Hill Book Co., New York.
• Klebanov, B., Barlam, D., Nystrom, F., 2008, Machine Elements: Life&Design, CRC Press, Boca Raton, FL.
• American Standard ANSI B92.2M-1980 "Involute Splines, Metric Module".
• German Standard DIN 5480 "Zahnwellen-Verbindungen mit Evolventenflanken".
• International Standard ISO 4156 "Straight cylindrical involute splines - Metric module, side fit".