Design, Analysis and Research of the Prototype Linear Magnetorheological Damper

• Autorzy: Bajkowski J. M.
• Konferencja: French-Polish Seminar of Mechanics (19 ; 8-11.06. 2011 ; Perpignan, France)
• Języki publikacji: EN

Abstrakty

EN

The paper issues the basic problems connected with the design, fabrication and analysis the linear magnetorheological (MR) dampers. Basic information concerning characteristics of typical MR fluids and dampers were presented. The prototype MR damper was designed, fabricated and tested under variety of working conditions. The performance calculations of the prototype were verified with the experimental results and evaluated. The numerical Bouc-Wen model of the damper was computed with the PeXsim software and its properties were widely examined.

Słowa kluczowe

EN

MR damper; MR fluid

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2011
• Tom: Vol. 35, No. 1
• Strony: 51--59
• Opis fizyczny: Bibliogr. 6 poz., il., wykr.

Twórcy

autor

Bajkowski J. M.

• Warsaw University of Technology. Institute of Machine Design Fundamentals, Warsaw, Poland,

Bibliografia

• Gavin, H., Hoagg, J., Dobossy, M, 2001, Optimal Design of MR Device, Proc. US-Japan Workshop on Smart Structures for Improved Seismic Performance in Urban Regions, Seattle, 225-236.
• Phillips, R. W., 1969, Engineering applications of fluids with a varible yield stress, Ph.D. Thesis, University of California, Berkley.
• Milecki, A., 2010, Electro- and magnetorheological fluids and their applications in engineering (in Polish), WPP, Poznań.
• Kim, J.-H., Lee, Ch.-W., Jung, B.-B., Park, Y., 2001, Design of Magneto-Rheological Fluid Based Device, KSME International Journal, 15, No 11, 1517-1523.
• Mukhlis, R. Z., Mohamed, N., Mohd Nor, M. J., 2006, The design and simulation of flow mode electrorheological damper, Jounal of Technology, University of Technology Malaysia, 44(A) 115-125.
• Ma, F., Zhang, H., Bockstedte, A., Foliente, G.C., Paevere, P., 2004, Parameter analysis of the differential model of hysteresis, Journal of Applied Mechanics ASME, 71, 342-349.