Modelling of the Thermodynamic Properties of Materials Metallic in Aspect Accuracy Calculations of Main Force Burnishing

• Autorzy: Maląg L. , Kukiełka L.
• Konferencja: French-Polish Seminar of Mechanics (18 ; 31.05.2010 ; Warsaw, Poland)
• Języki publikacji: EN

Abstrakty

EN

The paper make an analysis suitability of existence formulas describe of hardening curves to numerical calculations the parameters force of burnishing process. In majority cases of formulas not take into account all factors essential influence on dynamic yield stress. However proposed incremental method of determination change of stresses take into account of deformation history: strain, strain rate and temperature also new hybrid method to define the mechanical characteristics of materials metallic.

Słowa kluczowe

EN

thermodynamic properties; materials metallic; mechanical characteristics; main force burnishing; dynamic yield stress

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2010
• Tom: Vol. 34, No. 1
• Strony: 73--82
• Opis fizyczny: Bibliogr. 15 poz., wykr.

Twórcy

autor

Maląg L.

autor

Kukiełka L.

• Koszalin University of Technology. Faculty of Mechanical Engineering, Department of Technological Mechanics and Strength of Materials,

Bibliografia

• Bathe, K. J., 1982, Finite Element Procedures in Engineering Analysis, Prentice-Hall, New Jersey.
• Erbel, S., Kuczyński, K., Marciniak, Z., 1981, Plastic forming, PWN, Warsaw, (in polish).
• Gronostajski, J., Nakonieczny, L., 1981, Dependence between yield stress and crack deformation and microstructure parameters of carbon steel, Poznan University of Technology Progresses of Technology and Devices, exercise-book , 15-21 (in polish).
• Grosman, F., Hadasik, E., 2005, Technological of metal plasticity, Slask University of Technology, Gliwice, (in polish).
• Kleiber, M., 1985, Finite element method in nonlinear continuum mechanics, Library of Mechanices Applied, Institute of Fundamental Technological Research Polish Academy of Science, PWN, Warsaw-Poznan, (in polish).
• Kukiełka, L., 1994, Theoretical and experimental basis of burnishing process with electro-contact heating, Monograph of Mechanical Engineering Department, no 47, WSI, Koszalin, (in polish).
• Kukiełka, L., 1996, Dynamic field stresses model for metal materials in realization conditions of burnishing process with electric-current, 6th Conference Technology of Burnishing Process, Bydgoszcz, 72-80 (in polish).
• Majta, J., 2008, Strain and properties, microalloyed steels, chosen problems, AGH University of Science and Technology Press, Krakow (in polish).
• Maląg, L., Kukiełka, L., 2008, The influence analysis of inaccuracy obtain the mechanical properties of steels on state of stress and strain in surface layer of work-pieces of burnishing rolling process, Monograph, Contemporary problems in technology of burnishing process, 2, 67-76 (in polish).
• Maląg, L., Kukiełka, L., 2010, Numerical analysis of strains and stresses in stretched specimens at microstructure level, Journal PAMM, 9, 1, 347-348, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
• Malinin, N. N., Rżysko, J., 1981, Mechanics of material, PWN, Warsaw (in polish).
• Marciniak, Z., Konieczny, A., 1985, Modelling the changes of yield stress in range of temperatures of plastic forming on cold and hot, Conference Modelling the Plastic forming Process, Koninki, 1-29 (in polish).
• Perzyna, P., 1966, Theory of viscoplasticity, PWN, Warsaw (in polish).
• Perzyna, P., 1978, Thermodynamics of inelastic material, PWN, Warsaw (in polish).
• Zienkiewicz, O.C., 1972, Finite element method, Arkady, Warsaw (in polish).