PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Computer-Aided Multi-Layer Design of Switch-Mode Power Circuits

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Switch-mode circuits are used as power processors, e.g. DC/DC converters, synchronous rectifiers, high-frequency resonant power amplifiers. Their efficient computer-aided design is a technical problem only partly resolved so far. This paper presents a multi-layer CAD methodology for switch-mode power circuits. It discusses several levels of modeling of switching devices. First rough design verification is feasible using ideal switch models. It gives a satisfactory first-cut design. Then full models and general-purpose tools provide more exact verification of the design. At this exact step the design procedure makes use of interactive improvement followed by automatic optimization of some quality based objective functions. The proposed methodology is shown to be especially useful for high power class-D voltage-switching resonant amplifiers, where the so far used experimental optimization is extremely cost consuming.
Twórcy
autor
autor
  • Institute of Radioelectronics, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warsaw, Poland, jwojc@ire.pw.edu.pl
Bibliografia
  • [1] J. Abu-Qahouq and I. Batarseh, “Unified steady-state analysis of softswitching DC-DC converters”, IEEE Transactions on Power Electronics, vol. 17, no. 5, pp. 684-691, Sept. 2002.
  • [2] D. del-Aguila-Lopez, P. Pala-Schőnwalder, P. Molina-Gaudo, and A. Mediano-Herdia, “A discrete-time technique for the steady-state analysis of nonlinear class-E amplifiers”, IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 54, no. 6, pp. 1358-1366, June 2007.
  • [3] Ch. Basso, “Switch-mode power supplies: Spice simulations and practical designs”, McGraw-Hill Professional, 2008.
  • [4] D. Bedrosian and J. Vlach, “Time-domain analysis of networks with internally-controlled switches”, IEEE Transactions on Ciruits and System I: Fundamental Theory and Applications, vol. 39, no. 3, pp. 199-212, Mar. 1992.
  • [5] D. G. Bedrosian and J. Vlach, “An accelerated steady-state method for networks with internally controlled switches”, IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, vol. 39, no. 7, pp. 520-530, Jul. 1992.
  • [6] S. Ben-Yaakov, “Average simulation of PWM converters by direct implementation of behavioral relationships“, in Proc. Applied Power Electronics Conference, San Diego, USA, 1993, pp. 510-516.
  • [7] M. Bukowski, "Steady-state time-domain analysis of nonlinear circuits with periodic input via secant method”, in Proc. European Conference of Circuit Theory and Design, Istanbul, 1995, pp. 135-138.
  • [8] J. M. Burdio and A. Martinez, “A unified discrete-time state-space model for switching converters”, IEEE Transactions on Power Electronics, vol. 10, no. 6, pp. 694-707, Nov. 1995.
  • [9] M. Celik, A. Atalar, and M.A. Tan, “A new method for the steady-state analysis of periodically excited nonlinear circuits”, IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications., vol. 43, no. 12, pp. 964-972, Dec. 1996.
  • [10] C. C. Chan and K. T. Chau, “A fast and exact time-domain simulation of switched mode power regulators”, IEEE Transactions on Industrial. Electronics, vol. 39, no. 4, pp. 341-350, Aug. 1992.
  • [11] W. J. Chudobiak and D. F. Page, “Frequency and power limitations of Class-D transistor amplifiers”, IEEE J. Solid State Circuits, vol. SC-4, no 1, pp. 25-37, Feb. 1969.
  • [12] H. S.-H. Chung and A. Ioinovici, “Fast computer-aided simulation of switching power regulators based on progressive analysis of the switches’ state”, IEEE Transactions on Power Electronics, vol. 9, no. 2, pp. 206-212, Mar 1994.
  • [13] J. C. Contreras-Sampayo, J. Usaola-Garcia, and A. R. Wood, “Steadystate algorithm for switching power electronic devices”, IEE Proceedings Electric Power Applications, vol 148, no. 2, pp. 245-250, Mar. 2001.
  • [14] K. B. Dalaci, K. Gulez, and G. Cansever, “The design of a push-pull switch-mode power supply for AC drives”, in Proc. 30th Annual Conference of IEEE Industrial Electronics Society, vol. 2, Busan Korea, 2004, pp. 1201-1206.
  • [15] B. De Kelper, L.A. Dessaint, K. Al-Haddad, and H. Nakra”, A comprehensive approach to fixed-step simulation of switched circuits”, IEEE Transactions on Power Electronics, vol. 17, no. 2, pp. 216-224, Mar. 2002.
  • [16] N. Femia, G. Spagnuolo, and V. Tucci, “Internal analysis in power electronics”, Journal of Ciruits, Systems, and Computers, vol. 5, no. 3, pp. 317-336, Sept. 1995.
  • [17] N. Femia, G. Spagnuolo, and M. Vitelli, “Steady-State analysis of softswitching converters”, IEEE Transactions on Circuit and. Systems I: Fundamental Theory and Applications, vol. 49, no. 7, pp. 939-954, Jul. 2002.
  • [18] N. Femia, G. Spagnuolo, and M. Vitelli, “Steady-state analysis of PWM DC-to-DC regulators”, IEEE Transactions on Aerospace and Electronic Systems, vol. 39, no. 1, pp. 318-334, Jan. 2003.
  • [19] F. Guinjoan, J. Calvente, A. Poveda, and L. Martinez, “Large-signal modeling and simulation of switching DC-DC converters”, IEEE Transactions on Power Electronics, vol. 12, no. 3, pp. 485-494, May 1997.
  • [20] G. Hua, E. X. Yang, Y. Jiang, and F. C. Lee, “Novel zero-current transition PWM converters”, IEEE Transactions on Power Electronics, vol. 9, no. 6, pp. 601-606, Nov 1994.
  • [21] IRF Hexfet Power MOSFETs, International Rectifier, USA, 2010. Available at: www.irf.com
  • [22] T. Kato, “Efficient steady state analysis method with sensitivities of switch timings by the shooting method”, in Proc. Power Conversion Conference, Yokohama, Japan, 1993, pp. 550-556.
  • [23] T. Kato, “Multi-rate transient analysis of power electronic circuits by the envelope-following method with sensitivities of switch timings”, in Proc. IEEE Power Electronics Specialists Conference, vol. 2, Taipei, Taiwan, 1994, pp. 1277-1281.
  • [24] T. Kato and W. Tachibana, “Periodic steady-state analysis by a modified shooting method for a power electronic circuit”, Proc. Power Conversion Conference, Nagaoka, Japan, 1997, pp. 367-372.
  • [25] M. Kazimierczuk and D. Czarkowski, “Resonant power converters”, John Wiley, 1995.
  • [26] M. Kazimierczuk, “RF Power Amplifiers”, J. Wiley, 2008.
  • [27] D.J. Kessler and M.K. Kazimierczuk, “Power losses and efficiency of class-E power amplifier at any duty ratio”, IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 51, no. 9, pp. 1675-1689, Sept. 2004.
  • [28] K.S. Kundert and A. Sangiovanni-Vincentelli, “Steady-state methods for simulating analog and microwave circuits”, Kluwer, Boston, 1990.
  • [29] D. Li and R. Tymerski, „A comparison of steady-state methods for power electronic circuits”, Proc. IEEE Power Electronics Specialists Conference, 1998, pp. 1084-1090, vol. 2.
  • [30] Z. Lizhong and J. Vlach, “Analysis and steady-state of nonlinear networks with ideal switches”, IEEE Transactions on Circuits and System I: Fundamental Theory and Applications, vol. 42, no. 4, pp. 212-214, Apr. 1995.
  • [31] A. M. Luciano and A. G. M. Strollo, “A fast time-domain algorithm for the simulation of switching power converters”, IEEE Transactions on Power Electronics, vol. 5, no. 3, pp. 363-370, July 1990.
  • [32] D. Maksimović and S. Ćuk, “Switching converters with wide DC conversion range“, IEEE Transactions on Power Electronics, vol. 6, no. 1, pp. 151-157, Jan. 1991.
  • [33] D. Maksimovic, “Automated steady-state analysis of switching power converters using a general-purpose simulation tool”, in Proc. IEEE Power Electronics Specialists Conference, vol. 2, St. Louis, USA, 1997, pp. 1352-1358.
  • [34] A. Massarini, U. Reggiani, and M. Kazimierczuk, “Analysis of networks with ideal switches by state equations”, IEEE Transactions on Circuits and System I: Fundamental Theory and Applications, vol. 44, no. 8, pp. 692-697, Aug. 1997.
  • [35] SimPowerSystems 4 User Guide, The Mathworks, Inc., Massachusettts, 2007.
  • [36] J. Modzelewski, “Power supply problems of class-D and class-DE highfrequency tuned power amplifiers”, in Proc. 1st National
  • [37] Z. Mrcarica, T. Ilic, and V. B. Litovski, “Time-domain analysis of nonlinear switched networks with internally controlled switches”, IEEE Transactions on Circuit and. Systems I: Fundamental Theory and Applications, vol. 46, no. 3, pp. 373-378, Mar. 1999.
  • [38] M. Nakahara, “A fast computer algorithm for switching converters”, IEEE Transactions on Power Electronics., vol. 12, no. 1, pp. 180-186, Jan 1997.
  • [39] J. Ogrodzki, “Circuit simulation methods and algorithms”, CRC Press, Boca Raton, 1994.
  • [40] J. Ogrodzki and M. Skowron, “The charge-flux method in simulation of first kind switched circuits”, in Proc. European Conference of Circuit Theory and Design, Stresa, Italy, 1999, pp. 475-478.
  • [41] J. Ogrodzki, M. Skowron, J. Wojciechowski, L.J. Opalski, M. Bukowski, J. Modzelewski, and K. Zamłyński, “SWITCH-1. Prototype circuit simulator for switch-mode circuits. Users Guide”, Technical Report, Warsaw University of Technology, Warsaw, Poland, 1999.
  • [42] J. Ogrodzki, “OPTIMA version 2.0e - Users Guide”, Technical Report, Warsaw University of Technology, Warsaw, 1995.
  • [43] A. Opal and J. Vlach, “Consistent initial conditions of linear switched networks”, IEEE Transactions on Circuits and Systems, vol. 37, no. 3, pp. 364-372, Mar. 1990.
  • [44] L. J. Opalski and M. A. Stybliński, “GOSSIP- a generic system for statistical circuit design”, in Proc. European Design Automation. Conference, Hamburg, Germany, 1992, pp. 572-577.
  • [45] P. Pala-Schonwalder and J. M. Miro-Sans, “A discrete-time approach to the steady-state analysis and optimization of non-linear autonomous circuits”, International Journal of Circuit Theory and Applications, vol. 23, pp. 297-310, July/Aug. 1995.
  • [46] P. Pejović and D. Maksimović, “A method for fast time-domain simulation of networks with switches”, IEEE Transactions on Power Electronics, vol. 9, no. 4, pp. 449-456, July 1994.
  • [47] P. Pejović and D. Maksimović, “A new algorithm for simulation of power electronic systems using piecewise-linear device models”, IEEE Transactions on Power Electronics, vol. 10, no. 3, pp. 340-348, May 1995.
  • [48] PSPICE - Circuits Analysis Reference Manual, ver. 8.0, MicroSim Corp., July 1997.
  • [49] A. Shirsavar, “Teaching practical design of switch-mode power supplies”, IEEE Trans. Education, vol. 47, no. 4, pp. 467-473, Nov. 2004.
  • [50] SPECTRE Users Guide, Cadence Design System, 1997.
  • [51] STM Transistor Families, ST Microelectronics, Available at: www.st.com
  • [52] T. Suetsugu and M. K. Kazimierczuk, “Analysis and design of class E amplifier with shunt capacitance composed of nonlinear and linear capacitances”, IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 51, no. 7, pp. 1261-1268, July 2004.
  • [53] M. M. Tabrizi and N. Masoumi, “High frequency class E switch-mode power amplifier design and optimization with random search algorithm”, in Proc. The 16th International Conference on Microelectronics, Tunis, Tunisia, 2004, pp. 283-286.
  • [54] C. H. Trevisio, O. C. De Freitas, and V.J. Farias, “A ZVS-ZCS-PWM self-resonant DC-DC sepic converter”, in Proc. International Conference on Industrial Electronics., Control and Instrumentation, vol. 1. Bologna, Italy, 1994, pp. 176-181.
  • [55] C. Tseng and C. Chen, “On the ZVT-PWM Cuk converter”, IEEE Transactions on. Industrial. Electronics, vol. 45, no. 4, pp. 674-677, Aug. 1998.
  • [56] K. K. Tse, H. S-H. Chung, and S. Y. Hui, “Quadratic state-space modeling technique for analysis and simulation of power electronic converters”, IEEE Transactions on Power Electronics, vol. 14, no. 6, pp. 1086-1100, Nov. 1999.
  • [57] J. Valsa and J. Vlach, “SWANN - A programme for analysis of switched analogue non-linear networks”, International Journal of Circuit Theory and Applications, vol. 23, pp. 369-379, July/Aug. 1995.
  • [58] J. Vlach, J. M. Wojciechowski, and A. Opal, “Analysis of nonlinear networks with inconsistent initial conditions”, IEEE Transactions on Circuit and. Systems I: Fundamental Theory and Applications, vol. 42, no. 4, pp. 195-200, Apr. 1995.
  • [59] J. Vlach and A. Opal, “Modern CAD methods for analysis of switched networks”, IEEE Transactions on Circuit and. Systems I: Fundamental Theory and Applications, vol. 44, no. 8, pp. 759-762, Aug. 1997.
  • [60] E. Ven den Ejinde and J. Schoukens, “Steady-state analysis of a periodically excited nonlinear system”, IEEE Transactions on Circuit and. Systems, vol. 37, no. 2, pp. 232-242, Feb. 1990.
  • [61] V. Vorpérian, “Quasisquare-wave converters: Topologies and analysis”, IEEE Transactions on Power Electronics., vol. 3, no. 2, pp. 183-191, March 1988.
  • [62] Q. Wang and J. R. Marti, “A waveform-relaxation technique for steadystate initialization of circuits with nonlinear elements and ideal diodes”, IEEE Transactions on. Power Delivery, vol. 11, no. 3, pp. 1437-1443, July 1996.
  • [63] J. White and S. B. Leeb, “An envelope-following approach to switching power converter simulation”, IEEE Transactions on Power Electronics, vol. 6, no. 2, pp. 303-307, Apr. 1991.
  • [64] T. G. Wilson, “Life after the schematic: The impact of circuit operation on the physical realization of electronic power supplies”, Proceedings of the IEEE, vol. 76, no 4, pp. 325-334, Apr. 1988.
  • [65] B. K. H. Wong and H. S. H. Chung, “A general-oriented simulation technique for power electronic systems using quadratic branch voltage extrapolation”, IEEE Transactions on Industrial Electronics, vol. 44, no. 4, pp. 492-501, Aug. 1997.
  • [66] B. K. H. Wong and H. S. H. Chung, “Steady-state analysis of PWM DC/DC switching regulators using iterative cycle time-domain simulation”, IEEE Transactions on Industrial Electronics, vol. 45, no. 3, pp. 421-432, June 1998.
  • [67] B. K. H. Wong and H. Chung, “Dual loop iteration algorithm for steadystate determination of current-programmed DC/DC switching converters”, IEEE Transactions on Circuit and. Systems I: Fundamental Theory and Applications, vol. 46, no. 4, pp. 521-526, Apr. 1999.
  • [68] J. Wojciechowski, B. Sawionek, Z. Michalski, and J. Vlach, “Symbolic large-signal analysis of switched circuits”, Circuits, Systems, and Signal Processing Journal, vol.17, no. 3, pp. 321-334, March 1998.
  • [69] M. K. W. Wu, C. K. Tse, and O. B. P. Chan, “Development of an integrated CAD tools for switching power supply design with EMC performance evaluation”, IEEE Transactions on Industry Applications, vol. 34, no. 2, pp. 364-373, March/Apr. 1998.
  • [70] V. Yaskiv, “The new methods of switch-mode power supply designing for computer facilities”, in Proc. International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2001, pp. 87-90.
  • [71] F. Yuan and A. Opal, “Computer methods for switched circuits”, IEEE Transactions on Circuit and. Systems I: Fundamental Theory and Applications, vol. 50, no. 8, pp. 1013-1024, Aug. 2003.
  • [72] K. Zamłyński and J. Ogrodzki, “Electrothermal analysis of ICs”, in Proc. IEEE Internationall Symposion on Circuits and Systems, London, U.K., 1994, pp. 17-20.
  • [73] K. Zamłyński, “Idealized models of switches for SPICE and OPTIMA simulation of circuits with internally controlled elements”, in Proc. XXI National Conference on Circuit Theory and Electronic Circuits, Poznań, Poland, 1998, pp. 287-292.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWA0-0046-0015
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.