Modelling of the Behaviour of a Magnetorheological Damper by the Bodner-Partom Constitutive Equations

• Autorzy: Skalski P. , Woźnica K. , Bajkowski J.
• Konferencja: International Conference on Modelling and Simulation of the Friction Phenomena in the Physical and Technical Systems "FRICTION 2008" (5 ; 31.05-1.06.2008 ; Warsaw, Poland) ; French-Polish Seminar of Mechanics (16 ; 31.05-1.06.2008 ; Warsaw, Poland)
• Języki publikacji: PL

Abstrakty

EN

This paper presents an approach to describe the dynamic behaviour of a magnetorheological (MR) damper by the Bodner-Partom (B-P) constitutive equations. The B-P equations usually used for metal materials are presented for shear stresses to express viscoplastic proprieties of a MR fluid. The material parameters for the LORD RD 1005-3 damper are determined. The experimental results are shown and are compared with the numerical results.

Słowa kluczowe

PL

tłumik magnetoreologiczny; materiał inteligentny; równanie konstytutywne; model Bodnera-Partoma; reologia; symulacja numeryczna

EN

magnetorheological damper; smart material; constitutive equations; Bodner-Partom model; rheology; numerical simulation

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2008
• Tom: Vol. 32, No. 3
• Strony: 91--97
• Opis fizyczny: Bibliogr. 10 poz., il., wykr.

Twórcy

autor

Skalski P.

autor

Woźnica K.

autor

Bajkowski J.

• Warsaw University of Technology

Bibliografia

• Bajkowski, J., 2005, Experimental-didactic stand for determining selected characteristics of MR dampers and shock absorbers (in Polish), XXII Sympozjon PKM, Gdynia-Jurata.
• Bajkowski, J., 2007, Constructional and technological problems in designing of the intelligent MR damper, XV French-Polish Seminar of Mechanics, Lille.
• Bajkowski, J., Nachman, J., Shillor, M., Sofonea, M., 2000, A model for a magnetorheological damper, Mathematical and Computer Modelling, 48, 56-68.
• Boder, S. R., Chan, K. S., 1986, Modeling of continuum damage for application in elastic-viscoplastic constutive equations, Engineering Fracture Mechanics, 25.
• Carlson, J. D., Jolly, M. R, 2000, MR fluid, foam and elastomer devices, Mechatronics, (10), 555-569.
• Jimenez, R., Alvarez-Icaza, L., 2005, LuGre friction model for a magnetorheological damper, Structural Control and Health Monitoring, Mexico.
• Kwok, N. M., Ha, Q. P., Nguyen, J., Samali, B., 2006, A novel hysteretic model for magnetorheological fluid dampers and parameter identification using particle swarm optimization, Sensors ans Actuators, A 132, 441-451.
• Spencer, B. F., Dyke, S. J., Sain, M. K., Carslon, J. D., 1996, Phenomenological Model of a Magnetorheological Damper, ASCE Journal of Engineering Mechanics.
• Woźnica, K., Kłosowski, P., 2000, Evaluation of viscoplastic parameters and its application for dynamic behaviour of plates, Archive of Applied Mechanics, 70, 561-570.
• Woźnica, K., Pennetier, O., Renard, J., 2001, Experiments and Numerical Simulations on Thin Metallic Plates Subjected to an Explosion, Journal of Engineering Materials and Technology, 123, 203-209.