Application of Lame's Equation to Analysis of Interference Connection of Cone Bearing

• Autorzy: Manowski K. , Ostapski W. , Hać M.
• Konferencja: International Conference on Modelling and Simulation of the Friction Phenomena in the Physical and Technical Systems "FRICTION 2008" (5 ; 31.05-1.06.2008 ; Warsaw, Poland) ; French-Polish Seminar of Mechanics (16 ; 31.05-1.06.2008 ; Warsaw, Poland)
• Języki publikacji: PL

Abstrakty

EN

The stress and strain analysis of interference connection between outer track of cone bearing and the casing is carried out in this study. The equilibrium equations for axially symmetric state of stresses and strains in rotary solids are derived. For further analysis the simplified 2-D model is used and the outer track of cone bearing is divided into elements - each one of constant diameter. The Lame's equation is used for each segment in order to conduct the stress and strain analysis. The obtained results are compared with those obtained with the use of the finite element method (Ansys system) applied for the 3-D model. In both cases the calculations were executed for maximum and minimum interference calculated from assumed dimensional deviations of the diameters of the bearing track and the casing.

Słowa kluczowe

PL

łożysko stożkowe; interferencja; równanie Lamego; analiza elementów skończonych

EN

cone bearing; interference; Lame's equation; finite element analysis

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2008
• Tom: Vol. 32, No. 3
• Strony: 61--71
• Opis fizyczny: Bibliogr. 7 poz., wykr.

Twórcy

autor

Manowski K.

autor

Ostapski W.

autor

Hać M.

• General Electric Polska Sp. z o.o.

Bibliografia

• ANSYS Analysis Guides, 2001, Release 6.1, Ansys Inc., Canonsburg, PA 15317, USA.
• Cosenza, C., Fratini, L., Pasta, A., Micari, F., 2004, Damage and fracture study of cold extrusion dies, Engineering Fracture Mechanics, 71, 1021-1033.
• Elias-Zuniga, A., 2004, Analysis of a beam-column system under varying axial forces for elliptic type: the exact solution of Lame's equation, Int. Journal of Solids and Structures, 41, 2155-2163.
• Rżysko, J., 1971, Statyka i wytrzymałość materiałów, PWN Warszawa.
• Samant, R. N., Phelan, P. E., Ullah, M. R., 2002, Finite element analysis of residual-stress-induced flatness deviation in banded carbon seals, Finite Elements in Analysis and Design, 38, 785-801.
• Timoshenko, S. P, Goodier, J. N., 1970, Theory of elasticity, Singapore:McGraw-Hill.
• Yeo, H. T., Choi, Y., Hur, K. D., 2001, Analysis of the prestressed cold extrusion die, Int. Journal of Advanced Manufacturing Technology, 18, 54-61.