Impact Analysis the Difference of Temperatures During Vulcanization in Relation to Parameter-Deformation Characteristics and Tyre Tarameters

• Autorzy: Šuba I. , Kučerová J. , Letko I.
• Konferencja: International Conference Computer Simulation in Machine Design - COSIM 2006 (11 ; 2006 ; Krynica Zdrój, Poland)
• Języki publikacji: EN

Abstrakty

EN

After processing the all six measurements on thermocouples and evaluation of Aramis measurement, I will mathematically simulate dependency the parameters setting of final tyre properties by preset the running of vulcanization process. In case of success, this will allow to change final characteristics of vulcanized product without a change of green tyre composition (to program type of characteristic the finished tyre in advance), naturally in predefined range of individual parameters.

Słowa kluczowe

EN

ARAMIS; vulcanization; rubber; tyre

PL

Aramis; wulkanizacja; guma; opona

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2006
• Tom: Vol. 30, No. 4
• Strony: 146--151
• Opis fizyczny: Bibliogr. 4 poz., rys., wykr.

Twórcy

autor

Šuba I.

autor

Kučerová J.

autor

Letko I.

• Trencin University of Alexander Dubcek. Matador Automotive, Dubnica nad Vahom,

Bibliografia

• Prekop, Š. a kol., 2003, Gumárenské technológie II, l.vydanie, GC TECH s TnU AD v Trenčíne.
• Marcin, J., 1985, Pneumatiky, STNL Praha.
• Bafrnec, M., Juma, M., 2001, Tire Vulcanization Engineering, Department of Chemical and Biochemical Engineering, Slovak University of Technology, Bratislava.
• Protokół zo skúšky vulkanizácie zo dňa 26.1.2006 [VP-P-02/06]: Analýza vplyvu diferencie teplôt pri vulkanizâcií vo vzt'ahu na rozmerovo - deformačné vlastnosti a parametre plášt'a - Meranie prestupu tepla.