On the Reliability Estimation of the Conveyer Mechanism Using the Monte-Carlo Method

• Autorzy: Dekys V. , Sapietova A. , Kocur R.
• Konferencja: International Conference Computer Simulation in Machine Design - COSIM 2006 (11 ; 2006 ; Krynica Zdrój, Poland)
• Języki publikacji: EN

Abstrakty

EN

Paper presented application Monte-Carlo technique in reliability estimation of drag link conveyer and the formulation of limit state function. Reliability estimation can be done using other method too but using Monte-Carlo method is relatively simple and results from simulation can be very useful in other decisions of design engineer too. In some cases this simulation method can be refused concerning the long computing time but, an other time saving modifications this basic method can be advantage.

Słowa kluczowe

EN

Monte-Carlo method; drag-link mechanism; drag link conveyor

PL

metoda Monte Carlo; mechanizm dwukorbowy

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Problems
• Rocznik: 2006
• Tom: Vol. 30, No. 3
• Strony: 58--64
• Opis fizyczny: Bibliogr. 16 poz., il., wykr.

Twórcy

autor

Dekys V.

autor

Sapietova A.

autor

Kocur R.

• University of Zilina, Faculty of Mechanical Engineering, Department of Applied Mechanics,

Bibliografia

• Andel, J., 1976, Matematická statistika, Praha, SNTL/ALFA.
• Der Kiureghian, A., Liu, H. Z., 1986, Structural reliability under incomplete probability information, J. Eng. Mech., ASCE, 112 (1), 85-104.
• Ditlevsen, O., Madsen, H. O., 1996, Structural reliability methods, John Wiley & Sons, Chichester, UK, Internet edition, March 2004, http://wwv.mek.dtu.dk/staff/od/books.htm.
• Hasofer, A. M., Lind, C. N., 1974, An exact invariant first-order reliability format, J. Eng. Mech., ASCE, 100, 111-121.
• Lack, T., Gerlici, J., 2005, Contact area and normal stress determination on railway wheel/rail contact, Communications, 1/2005.
• Rosenblatt, M., 1952, Remarks on multivariate transformation, Ann. Math. Stat., 23, 470-472.
• Saga, M., Vavro, J., Kopecky, M., 2003, Pocitacova analyza a synteza mechanickych sustav, ZUSI v Ziline.
• Schienten, W., 1986, Technische Dynamik, Stuttgart.
• Schiehlen, W., 1990, Multibody Systems Handbook, Berlin, Springer-Verlag.
• Segla, S., Hroncova, D., Polakova, Z., 2004, Optimization of statical balancing of a lift mechanism. Acta Mechanica Slovaca, 3-C/2004, 153-160.
• Vavro, J., Kopecky, M., Fandakova, M., 2005, Optimisation of the design of the thin shell mechanical structures, 6th World Congresses of Structural and Multidisciplinary Optimisation, Rio de Janeiro, Brazil.
• Vavro, J., 1998, Optimization of the design of cross sectional quantities in transport machines and equipment, Zelená Hora, Studia i materialy, 186-194.
• Youn, B. D., Choi, K. K., 2004, Selecting Probabilistic Approaches for Reliability-Based Design Optimisation, AiAA Journal, 42, No 1, 124-131.
• Zmindak, M., Eisner, I., Lizon, I., 2005, Development of Interactive Computing System in Engineering Design, in: Numerical Methods in Continuum Mechanics, Zilina.
• Zmindak, M., Novak, S., Oravec, J., 1999, Pouzitie specialnych konecnych prvkov pri navrhu mechatronickych systemov, Mechatronika '99, Vratna, Slovakia, 244-251.
• Zmindak, M., Stiavnicky, M., Ruzicka, K., Sedlacek, E., 2002, Finite element modelling of rotary shaping with the use of an elastic medium, in: An Euro Conference on Numerical Methods and Computational Mechanics, Miskolc, Hungary.