PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Piezoelectricity Phenomenon in Mechatronic Systems

Identyfikatory
Warianty tytułu
Konferencja
French-Polish Seminar on Mechanics ; 14. ; International Conference on Modelling and Simulation of the Friction Phenomena in the Physical and Technical Systems "FRICTION 2006" ; 4. (5.06.2006 ; Warsaw, Poland)
Języki publikacji
EN
Abstrakty
EN
Lately a dynamic increase of piezoelectrical materials applications can be noticed in many fields of industry. The materials refering to the intelligent materials are widely applied as sensors and actuators. Such materials show simple piezoelectrical phenomenon that consists of changing mechanical displacement into electrical voltage input signal, as well as opposite piezoelectrical phenomenon that generates mechanical displacement when voltage is applied to system plates. Advantages such as: little dimensions, simple structure, low noise factor at operating provide wide applications generating and damping in vibration, converse of mechanical energy into electrical energy and opposite, elements of precise positioning and many others. In this article the analysis of piezoelectricity phenomenon is presented on the grounds of Mason's equations. Matrix of dependency of input values on output values has been determined. In most cases the system considering merely external parameters is sufficient. Thus the system is limited to a few single four-terminal networks. There has been established the matrix determining the system from external terminals point of view. Then by the chain joint the matrix of input-output dependences is provided (Bolkowski, 1986). Further proposed studies and research are to determine characteristics of mechatronic system and its comparison to the characteristic of mechanical system solved by Galerkin's method of approximation. The opportunity of applying graph method Buchacz, Wrobel, 2006) to non-classical determination of flexibility of piezoelectrical plates will be also analyzed (Buchacz, Swider, 2000; Buchacz, 1997).
Rocznik
Strony
27--31
Opis fizyczny
Bibliogr. 6 poz., wykr.
Twórcy
autor
autor
Bibliografia
  • Bishop, R. E. D., Gladwell, G. M. L., Michaelson, S., 1972, Macierzowa analiza drgań, Wydawnictwa Naukowo-Techniczne, Warszawa.
  • Bolkowski, S., 1986, Elektrotechnika teoretyczna - Teoria obwodów elektrycznych, Wydawnictwa Naukowo-Techniczne, Warszawa.
  • Buchacz A., Wróbel A., 2006, The network methods of modeling mechanical complex system, XLV Symposium "Modelling in Mechanics".
  • Buchacz, A., 1997, Komputerowe wspomaganie syntezy i analizy podzespołów maszyn modelowanych grafami i liczbami strukturalnymi, Wydawnictwo Politechniki Śląskiej, Gliwice.
  • Buchacz, A., Świder, J., 2000, Szkielety hipergrafów w modelowaniu, badaniu i pozycjonowaniu manipulatorów robotów oraz podzespołów maszyn, Wydawnictwo Politechniki Śląskiej, Gliwice.
  • Li, G. Q, Chen Chuan-Yao, Hu Yuan-Tai., 2005, Equivalent electric circuits of thin plates with two-dimensional piezoelectric actuators, Journal of Sound and Vibration 286, 145-165.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWA0-0022-0010
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.