PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

EM emission of ICs implementated in FPGA : influence of floor plan and electric function

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In the paper some investigations are presented aiming to check the influence of IC floor plan and the circuit function on its electromagnetic emissions. As the test vehicle Xilinx FPGA XCV800 type was used, in which two types of multiplicators were implemented. To compare the effects, high frequency currents in supply and ground pins of the circuits as well as near field disturbances were measured over the circuits.
Rocznik
Strony
1--7
Opis fizyczny
Bibliogr. 7 poz., wykr.
Twórcy
autor
  • Institute of Electron Technology, al. Lotników 32/46, 02-668 Warszawa, Poland
  • Institute of Electron Technology, al. Lotników 32/46, 02-668 Warszawa, Poland
Bibliografia
  • 1. O. WADA et al., Power Current Model of Digital IC with Internal Impedance for Power Decoupling Simulation, 4th Europ. Symp. on Electromagnetic Compatibility, Brugge Sept. 11-15, 2000, 315-320.
  • 2. J. F. KOŁODZIEJSKI, J. SZCZĘSNY, Electromagnetic Emissions of Integrated Circuits and PCBs, IEEE EMC Newsletter, Spring Issue 2004, 34-39.
  • 3. S. GONG et al., Packaging Impact on Switching Noise in High-Speed Digital Systems, IEE Proc.-Circuits Devices Syst., 1998, 145, 6, 446-452.
  • 4. X. DONG, S. DENG, D. BEETNER, T. HUBING, The Influence of IC Power Bus Design and Floor Planning on High- Frequency Package Current, sent to IEEE Trans. EMC.
  • 5. J. SZCZĘSNY, J. F. KOŁODZIEJSKI, D. OBRĘBSKI, Electromagnetic Emissions of Digital Circuits Implemented in Xilinx FPGAs 4025E and XCV 800. Electron Technol. Internet J. 2004, 36, 2, 1-6.
  • 6. DataSource CD-ROM rev. 8 Ql-2003.
  • 7. The Programmable Logic Data Book 1999, Xilinx Inc., 1999.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWA0-0021-0009
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.