PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Trudno wykrywalne radary szumowe

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Low Probability of Interception Noise Radars
Języki publikacji
PL
Abstrakty
PL
Od wielu lat prowadzone są prace nad radarami trudno wykrywalnymi (LPI). Klasyczne radary impulsowe można wykrywać z odległości znacznie większych niż odległości, na których radar jest w stanie wykrywać cele. Sytuacja zmieniła się znacznie po wprowadzeniu radarów pracujących z falą ciągłą, dla których efektywną detekcję obiektów można uzyskać przy mocy emitowanych sygnałów w zakresie od pojedynczych miliwatów do kilkuset watów. W radarach z falą ciągłą najczęściej stosuje się liniową, piłokształtną modulację częstotliwości (sygnały LMF). Radary takie charakteryzują się dość prostą konstrukcją i małymi wymogami na moc obliczeniową. Postęp w dziedzinie rozpoznania radioelektronicznego umożliwił jednak wykrywanie tych radarów. Dalsze poszukiwania technologii, która mogłaby zostać zastosowana w radarach trudno wykrywalnych, doprowadziły do opracowania różnych systemów modulacji emitowanej fali ciągłej, tak by z jednej strony uzyskać jak najlepsze własności detekcyjne radaru, z drugiej zaś uczynić radar trudnym do wykrycia. Jedną z ciekawszych modulacji, która zyskuje na popularności w ostatnim okresie, jest modulacja fali nośnej radaru sygnałem szumowym. Radar taki, zwany radarem szumowym, ma wiele unikatowych cech. Nie występuje w nim zjawisko niejednoznaczności odległościowej lub dopplerowskie, co w znacznym stopniu ułatwia proces detekcji i śledzenia obiektów. Długi czas oświetlenia obiektów pozwala na stosowanie procedur identyfikacji obiektów na podstawie zmian czasowych powierzchni skutecznej celu, co jest szczególnie cenne przy wykrywaniu helikopterów i startujących rakiet. Szumowy charakter emitowanego sygnału powoduje duże utrudnienia w detekcji emisji oraz bardzo komplikuje proces identyfikacji źródła emisji przez urządzenia ESM.
EN
For many years the intensive research on Low Probability of Interception (LPI) radars are conduct all over the world. Classical pulse radars can be detected from the long distance, considerably greater than distances on which the radar is able to detect targets. The situation changed considerably for radars working with the continuous wave. That type of radars emits small peak power - from single mill-watts to several hundreds of watts and can detect target far beyond the ESM detection range. The linear (sawtooth) frequency modulation is usually applied in such radar. Those radars are quite simple and require relatively low computational computing power. However the progress in Electronic Support Measurement (ESM) made detections of these radars possible. Further research on LPI radars has lead to development of different technology and different signal modulations. The one technology- namely noise radars - gains on the popularity in the last decade. In that radar high frequency carrier signal has frequency, phase or amplitude noise modulation. The noise radar has many unique features. The noise technology is free from range or Doppler ambiguity, what simplifies the detection and tracking processes. The long illumination time allows for usage of target identification procedures based on target Doppler history changes and changes in effective target crossection, what is essential for at the detection and non-cooperative identifications of helicopters and missiles. Noise character of emitted signal causes large difficulties in the detection of the radar, and complicates significantly the identification as the threat by enemy ESM devices.
Rocznik
Strony
111--119
Opis fizyczny
Bibliogr. 8 poz., il., wykr.
Twórcy
autor
  • Politechnika Warszawska, Instytut Systemów Elektronicznych, 00-665 Warszawa, ul. Nowowiejska 15/19, Kulpa@ise.pw.edu.pl
Bibliografia
  • [1] B. M. Horton, Noise-modulated distance measuring system, Proc. IRE, V0147, May 1959, pp. 821-828.
  • [2] G. R. Cooper, C. D. McGillem, Random signal radar, School Electr. Eng., Purdue Univ., Final Report, TREE 67-11, June 1967.
  • [3] D. B. Brick, J. Galejs, Radar Interferences and its Reduction, The Sylvania Technologist, vol. 11, No. 3, July 1959, pp. 96-108.
  • [4] S. E. Craig, W. Fishbein, O. E. Rittenbach, Continuous-Wave Radar with High Range Resolution and Unambiguous Velocity Determination, IRE Trans. Mil Electronics, vol. MIL 6, No. 2, April 1962, pp. 153-161.
  • [5] K. A. Lukin, The Principles of Noise Radar Technology, proc NRTW 2003, Yalta, Ukraine, 18-20 Sept. 2002.
  • [6] S. R. J. Axelsson, On the Theory of Noise Doppler Radar, Proc. IGARSS 2000, Honolulu, 24-28 July 2000, pp. 856-860.
  • [7] K. S. Kulpa, Z. Czekala, M. Smolarczyk, Long-Integration-Time Noise Surveillance Radar, First International Workshop On The Noise Radar Technology NRTW-2002, September 18-20, 2002, pp. 238-243.
  • [8] K. Kulpa, Z. Czekala, Short Distance Clutter Masking Effects in Noise Radars, Proc. of the Int. Conf. on the Noise Radar Technology, Kharkiv, Ukraine, 21-23 October 2003.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BWA0-0007-0069
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.