PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Depositional environments of loesses from the Sandomierz section, SE Poland, based on lithological and SEM studies

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The litology of the Sandomierz section deposits have been examined, with SEM analysis performed on 4 quartz grain-size classes. All of the Sandomierz deposits contain predominant quartz grains with signs of aeolian transport. This refers both to morainic till and muds underlying the loess section as well to loesses them selves along with soil complexes. A much smaller, although significant contribution comprises redeposited grains with features of a high energy beach environment. Their content in creases up section. During sedimentation of the LMg (younger upper loess) deposits (later part of the Vistulian Glaciation) wind strength was in creasing. This is indicated by the upwards increasing content of coarser fractions within the interval, with simultaneously improved sorting, as well as by the increased contribution of garnets and the greater content of zircon and rutile at the top. The increasing contribution of aeolian quartz grains, the considerable content of grains redeposited from a beach environment and the decreasing amount of post-sedimentary features all suggest increased wind speed. Low variability in the shape of the 1–0.5 mm quartz grains from the LMg horizon indicates short transport and a similar nearby source of material. Alimentary areas for this horizon were composed of young Pleistocene muds and tills. A change in depositional conditions is observed at the LMs/LMg boundary (upper part of the Vistulian Glaciation). During deposition of the LMs (younger middle loess) horizon, wind strength decreased, as shown by the content of heavy minerals and the smaller mean grain-size along with the reduced content of aeolized quartz grains.
Słowa kluczowe
Rocznik
Strony
169--169
Opis fizyczny
–182, bibliogr. 41 poz., rys., wykr.
Twórcy
autor
Bibliografia
  • BIELECKA M. (1964) - Szczegółowa mapa geologiczna Polski w skali 1:50 000, arkusz Zawichost. Inst. Geol., Warszawa.
  • BORSY Z., FELSZRFALVY J. and LÓKI J. (1984) - Electron microscopic investigation of the sand material from the loess exposure at Paks. In: Lithology and Stratigraphy of Loess and Paleosols. Proceeding of the symposium organised by INQUA Commission on loess and paleopedology: 123-133, Budapest.
  • CEGŁA J., BUCKLEY T. and SMALLEY I. J. (1971) - Microtextures of particles from some European loess deposits. Sedimentology, 17: 129-134.
  • CHLEBOWSKI R., LINDNER L., BARCZUK A., BOGUCKI A., GOZHIK P., ŁANCZONT M. and WOJTANOWICZ J. (2003) - Accumulation conditions of the younger upper loess of Sandomierz Basin, Mid-Carpathian Foreland and Podolian Upland on the basis of the geological and mineralogical studies. Ann. UMCS Sec. B, 58: 7-64.
  • COUDE-GAUSSEN G. and BALESCU S. (1987) - Etude comparee de loess periglaciaires et peridesertiques: premiers resultats d'un examen des grains de quartz au microscope electronique balayage. In: Loess and Environment, Catena Supplement, 9: 129-144.
  • DERBYSHIRE E. (1984) - Granulometry and fabric of the loess at Iiuzhoutai, Lanzhou, People's Republic of China. In: Lithology and Stratigraphy of Loess and Paleosols. Proceeding of the symposium organized by INQUA Commission on loess and paleopedology: 95-103, Budapest.
  • DOLECKI L. (1987) - Differentiation of grain size of the Vistulian loesses on the Grzęda Horodelska Plateau (SE Poland) (in Polish with English summary). Ann. UMCS, sec. B, 41: 165-178.
  • FOLK R. L. and WARD W. (1957) - Brazos River Bar: a study in the significance of grain size parameters. J. Sedim. Petrology, 27: 3-26.
  • GAOZHONG N. and DEMING H. (1991) - Anew explanation regarding the provenances of material of China's Xiashu loess. The series of the XIII INQUACongress. Loess, Environmental Global Change, Science Press: 213-226, Beijing.
  • GOUDIE A. S., RENDELL H. and BULL A. A. (1984) - The loess of Tajik S.S.R. International Karakorum Project, 1: 339-412, Cambrige University Press, Cambrige.
  • GOZDZIK J. and MYCIELSKA-DOWGIAŁŁO E. (1988) - Geneza zmatowienia powierzchni dobrze zaokrĄglonych ziarn kwarcu w świetle badań w mikroskopie elektronowym. In: Geneza osadów i gleb w świetle badań w mikroskopie elektronowym (ed. E. Mycielska-Dowgiałło): 57-64. Wyd. UW, Warszawa.
  • HARASIUMIUKM. (1987) - Lithologic properties as indices of the sedimentation conditions of the Vistulian loesses in the eastern part of the Nałęczów Plateau (SE Poland). Ann. UMCS, Sec. B, 41: 179-202.
  • KENIG K. (1980) - Mineral composition of deposits of Gas glacier frontal moraine (Spitsbergen) with reference to SEM analysis of grain surface (in Polish with English summary). Kwart. Geol., 24 (3): 711-740.
  • KENIG K. (1987) - Microstructures of surfaces of quartz grains from loess and underlying till from the area of Sandomierz (Southern Poland). Abstract. XII Congress INQUA 87, Canada.
  • KENIG K. (1988) - Textures features of the surface of quartz grains from tills of the profile at Wólka Pietkowska (region between the Bug and the Narew rivers) - an attempt at quantitative evaluation (in Polish with English summary). In: Geneza osadów i gleb w świetle badań w mikroskopie elektronowym: 73-80. Wyd. UW, Warszawa.
  • KENIG K. (1991a) - Loess section at Sandomierz: lithological features with the results of the quartz grain analysis by SEM (in Polish with English summary). In: Main Sections of Loesses in Poland (ed. H. Maruszczak): 75-83. UMCS, Lublin.
  • KENIG K. (1991b) - Lithostratigraphy of glacial till horizons in borehole profiles in the Suwałki Lakeland (in Polish with English summary). UAM, Ser. Geogr., 50: 457-470.
  • KENIG K. (1993) - Loess in Nieledew profile in the light of lithological studies and electron microscope investigations (in Polish with English summary). Ann. UMCS Sec. B, 48: 154-174.
  • KENIG K. (1997) - Warunki sedymentacji LSg1 i LMg+s w Orzechowcach na podstawie badań litologicznych i mikroskopii elektronowej. In: Glacjał i peryglacjał Kotliny Sandomierskiej i Przedgórza Karpat w okolicy Przemyśla. Seminarium terenowe, Lublin: 18-20.
  • KENIG K. (2006) - Surface microtextures of quartz grains from Vistulian loesses from selected profiles of Poland and some other countries. Quater. Internat., 152-153: 118-135
  • KONECKA-BETLEY K. and CZĘPIŃSKA-KAMIŃSKA D. (1991) - Loess section at Sandomierz (in Polish with English summary). In: Main Sections of Loesses in Poland (ed. H. Maruszczak): 70-73. UMCS, Lublin.
  • KONECKA-BETKEY K. and CZĘPIŃSKA-KAMIŃSKA D. and ZAGÓRSKIZ. (1987) - Development and properties of paleosols in the loess section at Sandomierz (SE Poland) (in Polish with English summary). Ann. UMCS Sec. B, 41: 203-218.
  • KRINSLEYD. H. and DOORNKAMP J. C. (1973) - Atlas of quartz sand surface textures. Cambridge University Press. Cambridge.
  • Le RIBAULT L. (1977) - L'exoscopie des quartz. Masson, Paris.
  • MAHANEY W. C. (2002) - Atlas of sand grain surface textures and applications. Oxford University Press.
  • MAHANEY W. C. and ANDRES W. (1991) - Glacially crushed quartz grains in loess as indicators of long-distance transport from major European centres during the Pleistocen. Boreas, 20: 231-239.
  • MARUSZCZAK H. (1991) - Stratigraphical differentiation of Polish loesses (in Polish with English summary). In: Main Sections of Loesses in Poland (ed. H. Maruszczak): 13-35. UMCS, Lublin.
  • MYCIELSKA-DOWGIAŁŁO E. (1978) - Rozwój rzeźby fluwialnej północnej części Kotliny Sandomierskiej w świetle badań sedymentologicznych. Rozpr. UW, 120: 148-155.
  • NAWROCKI J., POLECHOŃSKA O., BOGUCKIJ A. and ŁANCZONT M. (2006) - Paleowind directions recorder in youngest loess in Poland and western Ukraine as derived from anisotropy of magnetic susceptibility measurements. Boreas, 35: 266-271.
  • PYE K. (1983) - Grain surface textures and carbonate content of late Pleistocen loess from West Germany and Poland. J. Sediment. Petrol., 53 (3): 973-980.
  • PYE K. (1984) - SEM investigation of quartz silt micro-textures in relation to the source of loess. In: Lithology and Stratigraphy of Loess and Paleosols. Proceeding of the symposium organized by INQUA Commission on loess and paleopedology: 139-151, Budapest.
  • PYE K. (1987) - Aeolian dust and dust deposits. Academic Press, Cambridge.
  • PYE K. and TSOAR H. (1987) - The mechanics and geological implications of dust transport and deposition in deserts with particular reference to loess formation and dune sand diagenesis in the northern Negev, Israel. In: Desert Sediments: Ancient and Modern. Geol. Soc. Spec. Publ., 35: 139-156.
  • RŮŽIČKOVÁ E., RŮŽIČKAM., ZEMAN A. and KADLEC J. (2001) - Quaternery clastic sediments of the Czech Republic. Texture and structures of main genetic types. Cesky Geol. Ustav, Praha.
  • RYWOCKA-KENIG K. (1997) - Surface microtextures of quartz grains from loesses (in Polish with English summary). Pr. Państw. Inst. Geol., 155: 1-53.
  • SMALLEYI. J. (1966) - The properties of glacial loess and the formation of loess deposits. J. Sediment. Petrol., 36: 669-676.
  • SMALLEY I. J. and CABRERA J. G. (1970) - The shape and surface textures of loess particles. Geol. Soc. Am. Bull., 81: 1591-1595.
  • TIMIREVA S. N. and VELICHKO A. A. (2006) - Depositional environments of the Pleistocene loess-soil series inferred from sand grain morphoscopy - a case study of the East European Plain. Quater. Internat., 152-153: 136-145.
  • WARNKE D A. (1971) - The shape and surface texture of loess particles. Discussion. Geol. Soc. Am. Bull., 82 (8): 2357-2360.
  • WHALLEY W. B., SMITH B. J., MACALISTER J. J. and EDWARDS A. J. (1987) - Aeolian abrasion of quartz particles and the production of silt -size fragments. preliminary results. In: Desert Sediments: Ancient and Modern. Geol. Soc. Spec Publ., 35: 129-138.
  • VITA-FINZI C, SMALLEY I. J. and KRINSLEY D. H. (1973) - Crystalline overgrowths on quartz silt particles. J. Geol., 81: 106-108.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUS6-0014-0014
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.