Integrated product and process development using CAx methods

• Autorzy: Chlebus E.
• Konferencja: Rapid Production 2004. Innovation ‒ Knowledge ‒ Industry (1st International Conference; 29 September-1 October 2004; Wrocław)
• Języki publikacji: EN

Abstrakty

EN

The manufacture and consumption of market products shows ever growing trends, and this means not only the supply and demand volume but also, to a higher and higher extent, searching for new products distinguishable from the variety of products on the market. Not only new methods of market investigation have appeared to specify its requirements, but some attempts were also made at elaborating suitable methods and techniques of engineering to ensure flexible and synchronised reaction to market demands. Thus, it is necessary to find methods of functional, logical and structural combination of the so far existing engineering applications like CAx, new manufacturing technologies - Rapid Prototyping/Rapid Tooling/Reverse Engineering, multi functionally systems - Product Data Management/Team Data Management, Production Planning and Control and new organise methods Concurrent Engineering/Collaborative Engineering. Actually very important role play simulation tools and optimization methods. The above mentioned methods and tools in the paper are described.

Słowa kluczowe

EN

product and process development; CAx techniques; rapid prototyping; symulation

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Prace Naukowe Instytutu Technologii Maszyn i Automatyzacji Politechniki Wrocławskiej. Konferencje
• Rocznik: 2004
• Tom: Vol. 85, nr 42
• Strony: 55--64
• Opis fizyczny: Bibliogr. 11 poz., rys.

Twórcy

autor

Chlebus E.

• Centre for Advanced Manufacturing Technologies, Institute of Production Engineering and Automation, Wroclaw University of Technology

Bibliografia

• [1] ANDERL R., LISE H., OESER A.: Neue Lehr- and Lehrformen fuer die virtuele Produktentwicklung, Industrie Management 16/2000.
• [2] CHLEBUS E.: CAx computer techniques in production engineering. WNT Warsaw 2000 (in Polish).
• [3] CHLEBUS E: Rapid prototyping/rapid tooling techniques in product development, Printing House of Wroclaw University of Technology (PWr). Wroclaw 2003.
• [4] CZAJKA J.: Design of manufacturing system topology on the ground of technological tasks, Doctor's Thesis, Institute of Machine Engineering and Automation of PWr, Wroclaw 2003 (in Polish).
• [5] EIGNER M.: Requirements with regard to PDM system architecture and functionality ‒ a vendors report, Proceedings of Product Data Management based on International Standards, 18 November Volkswagen AG, Braunschwaig 1999.
• [6] GEBHARTD A.: Rapid prototyping, München-Wien, Carl Hanser Verlag, 1996.
• [7] MATUSZEK J., KURIC I., DEBNAR R.: Computer Aided Process Planning, Printing House of Lodz Technical University, Division in Bielsko-Biala, Bielsko-Biala 1999.
• [8] N.N. Effiezienzsteigerungen durch Wissensmanagentent, ZWF 93 (1998), 9.
• [9] OCZOŚ K.E.: Rapid Prototyping and Rapid Tooling — Development of methods and techniques of rapid manufacture of models, prototypes and small-series products, Mechanik 1998, No. 4 (in Polish).
• [10] REDEKER G., SAUER R.: Continuous Engineering - Kontinuierliche Produktentwicklung nach dem Schichtprinzip, Industrie Management 16/2000, GITO Verlag
• [11] STEINHILPER R., STENDER S: Product-Life-Cycle-Management, Seminar: Produkte mit technischer Intelligenz entwickeln, herstellen and betreiben, Fraunhofer IPA Technologie-Forum F 42, 1.Juli '99, Stuttgart 1999