Chosen aspects of modern CAPP systems

• Autorzy: Kuric I. , Legutko S.
• Języki publikacji: EN

Abstrakty

EN

Process planning is a task that requires a significant amount of both time and experience. Computer support or computerized process planning systems can help to reduce a process planning time and increase plan consistency and efficiency. There are two approaches for creation and processing of process plan based on computer support and advanced planning methods : variant method based on Group Technology and generative method. Authors present new approach to this problem that consists of parameterisation of process plan and association with part features. Several important aspects of methodology for generative CAPP system have been described. The frame of new conception of design CAD/CAPP system has been also presented.

• Wydawca: Institute of Bioorganic Chemistry Scientific Publishers OWN, Polish Academy of Sciences
• Czasopismo: Computational Methods in Science and Technology
• Rocznik: 2001
• Tom: Vol. 7, nr 2
• Strony: 65--74
• Opis fizyczny: Bibliogr. 8 poz., tab.

Twórcy

autor

Kuric I.

• Faculty of Mechanical Engineering, Department of Measurement and Automation, University of Zilina, SK-010 01 Zilina, Slovak Republic

autor

Legutko S.

• Poznań University of Technology, Institute of Mechanical Technology, Piotrowo 3, 61-138 Poznań, Poland

Bibliografia

• [1] Bedworth D. D., Henderson M. R., Wolfe P. M., Computer integrated design and manufacturing, McGraw-Hill, New York, 1991.
• [2] Crama Y., Oerlemans A., Spieksma F., Production planning in automated manufacturing, Springer Verlag, Berlin, 1994.
• [3] Chang T. C., Expert process planning for manufacturing, Addison-Wesley Publ., Massachusetts, USA, 1990.
• [4] Samek A., Duda J., Manufacturing knowledge as a methodolical base in the planning of machining process, Proc. CIM, Zakopane, 14-17. 5. 1996, vol. III, 441-448.
• [5] Janáč A., Osanna P. H., Kurie I., Contribution to modelling of process planning. In: Journal Automation und Messtechnik, 4/1997, Springer Verlag KG, Vienna, 182-185.
• [6] Mičieta B., Mičietová A., Verbindung CAP - PPS - CIM. In: Proceedings of CA Systems and Technologies, Int. DAAAM Workshop, 19. 3. 1997, Žilina, 95-98.
• [7] Velišek K., Design methodology ofschediding strategies and scenarios of complex flexible systems. In: Vedecké práce MtFSTU. Zv.5„ 1997, 71-80.
• [8] Marcinčin J. N., CAPE (Computer aided production engineering) technológie a ich zaradenie do štruktúry CIM. In: Zbornik ATPVZvolen, TU Zvolen, 17. 9. 1998, Zvolen, 59-63.