High - temperature oxidation resistance in yttrium implanted stainless steel

• Autorzy: Barlak M. , Piekoszewski J. , Werner Z. , Sartowska B. , Waliś L. , Starosta W. , Kierzek J. , Kowalska E. , Wilhelm R. A. , Pochrybniak C. , Woźnica M.
• Konferencja: Proceedings of the International Conference on Development and Applications of Nuclear Technologies NUTECH-2011, 11-14 September 2011, Kraków, Poland
• Języki publikacji: EN

Abstrakty

EN

Austenitic AISI 304, 316L and ferritic 430 stainless steels were implanted with yttrium to fluences ranging between 1 x 1015 and 5 x 1017 ions/cm2. The samples were subjected to oxidation in air at a temperature of 1000 centigrade for a period of 100 h and next examined by stereoscopic optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and Rutherford back scattering spectrometry (RBS). The results obtained with the use of ion implantation are discussed.

Słowa kluczowe

EN

high-temperature oxidation resistance; ion implantation; yttrium

• Wydawca: Institute of Nuclear Chemistry and Technology
• Czasopismo: Nukleonika
• Rocznik: 2012
• Tom: Vol. 57, No. 4
• Strony: 473--476
• Opis fizyczny: BIbliogr. 19 poz., rys.

Twórcy

autor

Barlak M.

autor

Piekoszewski J.

autor

Werner Z.

autor

Sartowska B.

autor

Waliś L.

autor

Starosta W.

autor

Kierzek J.

autor

Kowalska E.

autor

Wilhelm R. A.

autor

Pochrybniak C.

autor

Woźnica M.

• National Centre for Nuclear Research (NCBJ), 7 Andrzeja Sołtana Str., 05-400 Otwock/Świerk, Poland, Tel.: [phone], Fax: [phone],

Bibliografia

• 1. Abreu CM, Cristoba MJ, Novoa XR, Pena G, Perez MC, Rodriguez RJ (2002) Modifications of the stainless steels passive film induced by cerium implantation. Surf Coat Technol 158/159:582–587
• 2. Alman DE, Jablonski PD (2007) Effect of minor elements and a Ce surface treatment on the oxidation behavior of an Fe-22Cr-0.5Mn (Crofer 22 APU) ferritic stainless steel.Int J Hydrogen Energy 32:3743–3753
• 3. Balland A, Gannon P, Deibert M, Chevalier S, Caboche G, Fontana S (2009) Investigation of La2O3 and/or (Co,Mn)3O4 deposits on Crofer22APU for the SOFC interconnect application. Surf Coat Technol 203:3291–3296
• 4. Brylewski T, Przybylski K, Morgiel J (2003) Microstructure of Fe-25Cr/(La, Ca)CrO3 composite interconnector in solid oxide fuel cell operating conditions. Mater Chem Phys 81:434–437
• 5. Bugaev SP, Nikolaev AG, Oks EM, Schanin PM, Yushkov GY (1994) The “TITAN” ion source. Rev Sci Instrum 65:3119–3125
• 6. Chevalier S, Bonnet G, Dufour F, Larpin JP (1998) The REE: a way to improve the high-temperature behaviour of stainless steels? Surf Coat Technol 100/101:208–213
• 7. Cleugh D, Blawert C, Steinbach J, Ferkel H, Mordike BL, Bell T (2001) Effects of rare earth additions on nitriding of EN40B by plasma immersion ion implantation. Surf Coat Technol 142/144:392–396
• 8. Fontana S, Amendola R, Chevalier S et al. (2007) Metallic interconnects for SOFC: Characterisation of corrosion resistance and conductivity evaluation at operating temperature of differently coated alloys. J Power Sources 171:652–662
• 9. http://home.rzg.mpg.de/~mam/
• 10. http://www.surrey.ac.uk/ati/ibc/research/modelling_simulation/suspre.htm
• 11. Jedlinski J, Godlewski K, Mrowec S (1989) The influence of implanted yttrium and cerium on the protective properties of a beta-NiAl coating on a nickel-base superalloy. Mater Sci Eng A 120/121:539–543
• 12. Jedliński J, Mrowec S (1987) The influence of implanted yttrium on the oxidation behaviour of β-NiAl. Mater Sci Eng 87:281–287
• 13. Lian Y, Qunji X, Wang H (1995) The tribological behaviour of GCr15 bearing steel implanted with cerium. Surf Coat Technol 73:98–104
• 14. Perez FJ, Otero E, Sierro MP et al. (1998) High temperature corrosion protection of austenitic AISI 304 stainless steel by Si, Mo and Ce ion implantation. Surf Coat Technol 108/109:127–131
• 15. Picardo P, Chevalier S, Molins R et al. (2006) Metallic interconnects for SOFC: Characterization of their corrosion resistance in hydrogen/water atmosphere and at the operating temperatures of differently coated metallic alloys. Surf Coat Technol 201:4471–4475
• 16. Przybylski K (1988) The influence of yttrium on the formation and growth mechanism of chromium oxide layer on scaling-resistant alloys. Stanisław Staszic Academy of Mining and Metallurgy, Kraków (in Polish)
• 17. Qu W, Li J, Ivey DG (2004) Sol-gel coatings to reduce oxide growth in interconnects used for solid oxide fuel cells. J Power Source 138:162–173
• 18. Riffard F, Buscail H, Caudron E, Cueff E, Issartel C, Perrir S (2002) Effect of yttrium addition by sol-gel coating and ion implantation on the high temperature oxidation behaviour of the 304 steel. Appl Surf Sci 199:107–122
• 19. Sartowska B, Piekoszewski J, Walis L et al. (2011) Structure and composition of scales formed on AISI 316 L steel alloyed with Ce/La using high intensity plasma pulses after oxidation in 1000°C. Acta Phys Pol A 120:83–86