In - cylinder OH and CO2* detection in SI engine through UV natural emission spectroscopy

• Autorzy: Merola S. S. , Tornatore C. , Marchitto L. , Valentino G.
• Języki publikacji: EN

Abstrakty

EN

Processes of the combustion of liquid fuels and solid are more complex than combustion of fuel gases. With reference to liquid fuels occur additionally processes of vaporization of the fuel, and with reference to solid fuels - decomposition of the solid phase with processes of melting and vaporization, pyrolysis, or gasification. This simultaneous and also different influence of different parameters is sometimes a reason of incorrect interpretation of experimental results. The study of the theoretical model of the combustion process concerning of liquid and solid fuels and which then the model takes into account also the gas- phase, because combustion processes take place in this phase, and occurs the interaction of the phase gas- and liquid or the solid one. The theoretical model is presented basing on experimental initial researches realized in a model with reference to liquid fuels and solid ones. Researches realized in the constant volume chamber with measurements of the pressure during the process of the combustion with the use of quick photography and with measurement of the distribution of the velocity in the spray of the fuel and droplet measurements by means the laser Doppler equipment LDV and PDPA. There were obtained a good agreement of findings experimental researches with the theoretical model. Generally, on the combustion velocity of liquid fuels and solid one significant influence has a kind (laminar, temporary and turbulent) and the thickness of the thermal boundary layer.

Słowa kluczowe

EN

road transport; simulation; combustion engines; air pollution; environmental protection

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2012
• Tom: Vol. 19, No. 4
• Strony: 429--437
• Opis fizyczny: Bibliogr. 19 poz., rys.

Twórcy

autor

Merola S. S.

autor

Tornatore C.

autor

Marchitto L.

autor

Valentino G.

• Istituto Motori, National Research Council of Italy Viale G. Marconi, 4, 80125 Naples, Italy tel.: [phone],

Bibliografia

• [1] Berggren, C., Magnusson, T., Reducing automotive emissions - The potentials of combustion engine technologies and the power of policy Original Research Article, Energy Policy, Vol. 41, pp. 636-643, 2012.
• [2] Heywood, J. B., Kasseris, E., Comparative Analysis of Automotive Powertrain Choices for the Next 25 Years, SAE Paper No. 2007-01-1605, 2007.
• [3] Henein, N. A., Tagomori, M. K., Cold-start hydrocarbon emissions in port-injected gasoline engines, Progress in Energy and Combustion Science, 25, pp. 563–593, 1999.
• [4] Behnia, M., Milton, B. E., Fundamentals of fuel film formation and motion in SI engine induction systems, Energy Conversion and Management, 42(15-17), pp. 1751-1768, 2001.
• [5] Costanzo, V. S., Heywood, J. B., Mixture Preparation Mechanisms in a Port Fuel Injected Engine, SAE Technical Paper n. 2005-01-2080, 2005.
• [6] Gold, M. R., Arcoumanis, C., Whitelaw, J. H., Gaade, J., Wallace, S., Mixture Preparation Strategies in an Optical Four-Valve Port-Injected Gasoline Engine, Int. J. of Engine Research, 1(1), pp. 41-56, 2000.
• [7] Nogi, T., Ohyama, Y., Yamauchi, T., Kuroiwa, H., Mixture Formation of Fuel Injection Systems in Gasoline Engines, SAE Technical Paper n. 880558, 1988.
• [8] Meyer, R., Heywood, J. B., Liquid Fuel Transport Mechanisms into the Cylinder of a Firing Port-Injected SI Engine During Start Up, SAE Technical Paper n. 970865, 1997.
• [9] Merola, S. S., Vaglieco, B. M., Optical investigations of fuel deposition burning in ported fuel injection (PFI) spark-ignition (SI) engine, Energy, 34, pp. 2108–2115, 2008.
• [10] Merola, S. S, Sementa, P., Tornatore, C., Vaglieco, B. M., Effect of Injection Phasing on Valves and Chamber Fuel Deposition Burning in a PFI Boosted Spark-Ignition Engine, SAE International Journal of Fuels and Lubricants Vol. 1 No. 1 pp. 192-200, 2009.
• [11] Merola, S. S., Sementa, P., Tornatore, C., Vaglieco, B. M., Effect of the fuel injection strategy on the combustion process in a PFI boosted spark-ignition engine, Energy, Vol. 35, Is. 2, pp. 1094-1100, 2010.
• [12] Witze, P. O., Green, R. M., LIF and Flame-Emission Imaging of Liquid Fuel Films and Pool Fires in an SI Engine During a Simulated Cold Start, SAE Paper No. 970866, 1997.
• [13] Gaydon, A. G., The Spectroscopy of Flames, Chapman and Hall ltd., 1957.
• [14] Alkemade, C. Th. J., Herrmann, R., Fundamentals of Analytical Flame Spectroscopy, Hilger, Bristol, UK 1979.
• [15] Dieke, G. H., Crosswhite, H. M., The ultraviolet bands of OH. J. Quant. Spectrosc. Radiat. Transfer, 2, 97-199, 1962.
• [16] Bowman, C. T., Kinetics of pollutant formation and destruction in combustion, Progress in Energy and Combustion Science, Vol. 1, No. 1, pp. 33-45, 1975
• [17] Miller, J. A., Bowman, C. T., Mechanism and modeling of nitrogen chemistry in combustion, Progress in Energy and Combustion Science, Vol. 15, Is. 4, pp. 287-338, 1989.
• [18] Fenimore, C. P., Jones, G. W., Oxidation of soot by hydroxyl radicals, J. Phys. Chem., 71 (3), pp. 593–597, 1967
• [19] Puri, R., Santoro, R. J., Smyth, K. C., The oxidation of soot and carbon monoxide in hydrocarbon diffusion flames, Combustion and Flame, Vol. 97, Is. 2, pp. 125-144, 1994.