Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Prevention of composite material, characterized by a high acoustic insulation but satisfying spread of the dynamic interactions in the environment, the sound or vibration in materials requires new solutions task of isolation between the source of noise and vibration and the environment. These new solutions based on the idea of partition (of two or multilayer), the cores of granular materials, characterized by both good characteristics vibroisolation, sound absorption and vibration-damping materials. Using these solutions brings positive results in the reduction of acoustic energy, vibration isolation and acoustic damping material provided that they are the correct selection. The paper presents results of experimental investigations of acoustic insulation properties, parameters, physic - mechanical properties of selected structural elements made of materials belonging to the latest generation of noise and vibration safe guards applicable in the work environment and external environment. The paper presents the methodology and results of new materials used in Cathedrals: Vibroacoustics and Mechanics and Robotics and Mechatronics AGH, which should be standard in the selection of the parameters of vibroacoustic properties of the newly proposed structural engineering. The work was carried out in a research project 4875/B/TO2/2010/38 financed by Ministry of Science and Higher Education and projectII.B.12 (2011-2013) "New material solutions in the design of layered Barriers vibroacoustic protection of machinery and equipment", which is one of the objectives of the multiannual program "Improving the safety and working conditions," coordinated by CIOP - PIB in Warsaw.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
555--564
Opis fizyczny
Bibliogr. 7 poz., rys.
Twórcy
autor
autor
- AGH University of Science and Technology Faculty of Mechanical Engineering and Robotics Department of Vibroacoustics and Mechanics Mickiewicza Av. 30, 30-059 Krakow, Poland tel.: +48 12 617-36-21, fax: +48 12 633-23-14, jsikora@agh.edu.pl
Bibliografia
- [1] Kaczmarska, A, Engel, Z., Sikora, J., Dobór warstwowych zabezpieczeń przeciwhałasowych - wytyczne dla projektantów, Bezpieczeństwo Pracy, Nauka i Praktyka Nr 6 (6/2005), Miesięcznik Centralnego Instytutu Ochrony Pracy - PIB, str. 10-13, Warszawa 2005.
- [2] Sikora, J. Turkiewicz, J., Sound absorption coefficients of granular materials, Mechanics and Control, AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Commission on Applied Mechanics of Polish Academy of Science, Vol. 29, No. 3, pp. 149-157, Cracow 2010.
- [3] Sikora, J., Stanowisko do badań właściwości dźwiękoizolacyjnych przegród o małych wymiarach, Wyd. Politechniki Krakowskiej, Czasopismo Techniczne Mechanika, Z. 5-M/2011, Z. 15 (108), str. 65-77, 2011.
- [4] Sikora, J., Warstwy gumowe w rozwiązaniach zabezpieczeń wibroakustycznych, Wydawnictwa AGH, Kraków 2011.
- [5] Sikora, J., Turkiewicz, J., Właściwości dźwiękochłonne i zastosowanie granulatów gumowych, Izolacje: Budownictwo, Przemysł, Ekologia, Nr 1, str. 54–58, 2012.
- [6] Targosz, J., Układy wibroizolacji w transporcie szynowym i samochodowym, Rozprawy i Monografie, AGH, Wydawnictwa Naukowo-Dydaktyczne, str.1-237, Kraków 2007.
- [7] Targosz, J., Analiza i Badania właściwości fizykomechanicznych ustrojów elastomerowych, minimalizujścych dynamiczne oddziaływania podtorza kolejowego na otoczenie, TTS Nr 5-6, str. 87-91, 2008.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ8-0020-0043