PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Unsteady angular speed of diesel engine crankshaft preliminary examination

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper discusses issues related to measurement of unsteady angular speed of diesel engine crankshaft. The focus is on the selection and optimization of the measuring method to obtain high accuracy, eliminating errors resulting from the unsteady angular speed of markers on diesel engine crankshaft. A method that uses a counter markers placed on the engine flywheel had been worked out. Markers location has been read out by two slit optical sensors. Number of markers and the distance between the sensors were chosen so as to counter tooth during the transition between the sensors count the more than 10,000 pulses at rated speed of the shaft. This provided a measurement method resolution at 0.01 %. Initial studies were performed on one-cylinder diesel engine with the greatest unsteady of angular speed. Additionally analysis which treated the measured unsteady angular speed of diesel engine crankshaft as a deforming pressure mapping as a function of the calculated piston movement was performed. This deformation is caused by the assumption that a constant rotation speed is proportional to time, and measurements are made at a constant rate. In the case of synchronized measurements of PLL circuits duplicating markers on the shaft against the expectations the deformations due to the activity of the follow-up mode of such systems are increased. The influence of these deformations on the designation of an average error of cylinder indicated pressure and other parameters obtained from the analysis of the pressure and vibration envelope has been examined.
Twórcy
autor
  • Polish Naval Academy in Gdynia Mechanical-Electrical Faculty Śmidowicza Street 69, 81-103 Gdynia, Poland tel.: +48 58 6262617, marek@unitest.pl
Bibliografia
  • [1] Wajand, J., Pomiary szybkozmiennych ciśnień w maszynach tłokowych, Wydawnictwa Naukowo-Techniczne, Warszawa 1974.
  • [2] Łutowicz, M., Analysis of application of chosen methods for TDC determination in marine diesel engines, Journal of KONES Powertrain and Transport, Vol. 16, No. 4, Warszawa 2009.
  • [3] Łutowicz, M., Evaluation of the Condition of Cylinder Systems of the Engine Based on an Compression Process Analysis, Polish Journal of Environmental Studies, Vol. 18, No. 2A, Olsztyn 2009.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ8-0020-0041
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.