Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Projected increases in the cost of conventional fossil energy sources and greenhouse gas emissions caps are among the key drivers for the utilization of various gaseous fuels prepared from biomass in internal combustion engines, primarily in cogeneration units. Due to the low energy content and other poor qualities of many such fuels, they are often intended to be co-fired with diesel fuel, or used in blends with natural gas or other gaseous fuels. Variations in the composition of the biogas, limited capabilities of gas mixing and metering devices, and other factors create challenges in determining the intake charge composition, so that optimal mixture of air and multiple fuels can be maintained. In this study, an experimental device for mixing of two gaseous fuels was tested, with various gases, on a bus engine modified to run on experimental gaseous fuel blends. To evaluate the performance of the mixing device, the composition of the mixture of two fuel gases was continuously analyzed by an inexpensive NDIR ",garage-grade" exhaust gas analyzer. The focus of this paper is on the adaptation of the analyzer for this purpose, including calibration and linearization techniques, its verification, and performance. Preliminary results show that this analyzer, commonly used for automobile inspection and maintenance purposes, can serve, albeit with precautions and limitations, as a relatively simple tool for field measurements of the composition of a fuel gas mixture, both raw and mixed with air.
Wydawca
Czasopismo
Rocznik
Tom
Strony
535--541
Opis fizyczny
Bibliogr. 9 poz., rys.
Twórcy
autor
autor
- Technical University of Liberec, Faculty of Mechanical Engineering Department of Vehicles and Engines Hálkova Street 6, 461-17 Czech Republic tel.: +420 485353 148, fax: +420 485 353139, michal.vojtisek@tul.cz
Bibliografia
- [1] OTC MicroGas documentation, OTC SPX, Owantonna, Minnesota, USA.
- [2] Andros NDIR technology documentation, Lumasense, Santa Clara, California, USA.
- [3] Perkin Elmer technical information.
- [4] CRC Handbook of Chemistry and Physics, 75th edition, CRC Press, Boca Raton, Florida, USA 1994.
- [5] Todd, B., Young, J. B., Journal of Power Sources 110 (2002), 186-200
- [6] Air Liquide Gas Encyclopedia, http://encyclopedia.airliquide.com/Encyclopedia.asp?GasID=41
- [7] http://hyperphysics.phy-astr.gsu.edu/Hbase/tables/viscosity.html
- [8] Gas Viscosity Calculator, LMNO Engineering, http://www.lmnoeng.com/Flow/GasViscosity.htm
- [9] Model 821S Precision Gas Divider Operating Manual, Signal Instrument Co. Ltd., Camberley, England, 1994, http://www.k2bw.com/manuals/821sman.pdf .
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ8-0011-0016