Total current measurement interrupts detection method in automotive bulbs circuits

• Autorzy: Sobczyk Z.
• Języki publikacji: EN

Abstrakty

EN

Identification of interruption in automotive bulbs circuits by total current measurement method seems very attractive. This method allows on application the least length and weight wires in automotive electric network. These savings have special meaning in mass production. Due to less connections number increases reliability, too. Basing on electrical schematic general diagram has been described total current measurement interrupts detection method in automotive bulbs circuits. It has been pointed at sensibility on supply voltage value changes range of this method. It has been described bulbs’ main properties. As an analysis example has been chosen the most exacting from the possibilities of total current measurement method indicator lamp circuit. Besides supply voltage change, there are not equal load resistances in this circuit. This causes different bulbs' electric current values. It has been computed failure detector’s electric current values at minimal and maximal voltage in vehicle network. It has been analyzed proper working circuit likewise interruptions in bulbs' 21 [W] and 5 [W] circuits. It has been found that at accepted establishments correct and univocal interruption detection in 21 [W] bulbs is possible in full range of changes supply voltage. Detection of interruption in 5 [W] bulbs is possible only in part of range of changes supply voltage.

Słowa kluczowe

EN

transport; automotive lights; bulbs; network failures; interruptions identification method

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2011
• Tom: Vol. 18, No. 1
• Strony: 579--584
• Opis fizyczny: Bibliogr. 9 poz,. rys.

Twórcy

autor

Sobczyk Z.

• Military University of Technology, Faculty of Mechanical Engineering Institute of Motor Vehicles and Transport Gen. S. Kaliskiego Street 2, 00-908 Warsaw, Poland tel.[phone], fax: [phone],

Bibliografia

• [1] Herner, A., Riehl, H. J. Elektrotechnika i elektronika w pojazdach samochodowych, WKŁ, Warszawa 2006.
• [2] Katalog ELFA 55, ELFA Polska, sp. z o.o., Warszawa 2007.
• [3] Kolbiński, K., Słowikowski, J., Materiałoznawstwo elektrotechniczne, Wydawnictwa Politechniki Warszawskiej, Warszawa 1975.
• [4] Konopiński, M., Elektronika w technice motoryzacyjnej, WKŁ, Warszawa 1987.
• [5] Limann, O., Pelka, H., Radiotechnika. Poradnik, WKŁ, Warszawa 1993.
• [6] Ocioszyński, J., Laboratorium elektrotechniki samochodowej, WPW, Warszawa 1974.
• [7] Pijanowski, B., Akumulator, WKŁ, Warszawa 1991.
• [8] Widerski, T., Samochodowe sieci informatyczne, Poradnik Serwisowy Nr 5/2005, Wydawnictwo INSTALATOR POLSKI, Warszawa 2005.
• [9] www.swiatla.arbiter.pl: Wykres trwałości, światłości, mocy, ilości światła w zależności od napięcia.