Systems for damaged car bodys measurements

• Autorzy: Ratajczyk E.
• Języki publikacji: EN

Abstrakty

EN

Geometrical measurements of car bodies appear mainly in connection with post accident repair processes. They appear also independently in diagnostic measurements. Presentation of measuring systems is very actual in relation to a large number of car accidents. Diagnostic tests of repaired car body and restoring its nominal sizes are essential for safe traffic. The subject area is particularly interesting for service and repairing units e.g. tinsmith's workshops, but also for car experts. In the article, the methods of car body measurements will be characterized on the example of the use of simple telescopic gauges up to fully computerized electronic measuring systems. The examples of measuring card with basic points, being the nominal points’ coordinates, are presented as well as suggestions concerning the kinds of measuring tips ascribed to those points. Each card with basic points is characteristic only for a particular type of a car body. The examples of illustrations, with visible points on a car body where a prescribed measuring tip should be applied, are also shown. At the end an attempt of measurements' accuracy estimation will be presented on the example of one of electronic measuring devices.

Słowa kluczowe

EN

measuring systems for car bodies; measuring head for car bodies; electronic gauge for vehicle measuring

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2011
• Tom: Vol. 18, No. 1
• Strony: 503--508
• Opis fizyczny: Bibliogr. 11 poz., rys.

Twórcy

autor

Ratajczyk E.

• University of Ecology and Management in Warsaw Wawelska Street 14, 02-061 Warsaw, Poland tel.: [phone],

Bibliografia

• [1] Raatz, B., Nowoczesne technologie pomiarów i napraw samochodowych, Wyd. Oficyna Wydawnicza TROTON, Ząbrowo (www.troton.com.pl), ISDN 83-922340-0-6.
• [2] Ratajczyk, E., Jastrzębski, A., Car body geometry measuring systems used in the accident caused damage repair process, Mechanik No. 10 pp.844-849, 2009.
• [3] Car-O-Liner (Szwecja). www.car-o-liner.se, C.T.S.Sp z o.o. www.car-o-liner.pl.
• [4] Pfeifer, T., Imkamp, D., Schmidt,R., Coordinate Metrology and CAx-Application in Industrial Production. C. Hanser Verlag, Munich 2006.
• [5] Autorobot Finland Oy–www.autorobot.com. J. Sobański Auto System. www.sobanski.com.pl.
• [6] Chief Automotive Technologies (USA). www.chiefautomotive.com. ARMAL Sp. z o.o. www.armal.pl.
• [7] Blackhawk. www.blackhawkcr.com. NTS Narzędzia Technik Serwisowa Sp. z o.o. www.nts.com.pl.
• [8] Celette (Francja) www.celette.com. MASZ s.c. www.ofertamasz.pl.
• [9] Herkules Auto-Technika Warsztatowa.www..herkules-sc.pl.
• [10] Spanesi Polska.www.italtecnica.pl., www.spanesi.com.
• [11] Nałęcz, A. M., Systemy pomiarowo-naprawcze pojazdówsamochodowych po wypadkach, Praca dyplomowa magisterska, Wyższa Szkoła Ekologii i Zarządzania w Warszawie, Warszawa 2009.