The possibility of diagnosis EGR system's defects by vibration analysis

• Autorzy: Kaźmierczak A. , Wróbel R.
• Języki publikacji: EN

Abstrakty

EN

The Exhaust Gas Recirculation is a popular system of recirculation of the automotive vehicle emission. The principle of working depends on the forcing in the part of outlet gas to the combustion chamber. Majority of the users of automotive vehicles with EGR systems claim that system has negative effect on the performance of the car. Nonetheless, that opinion is subjective, because the generally available research on the subject does not exist. However, EGR system, as the most of automotive vehicle is being subjected to physic's rules - it uses up. The polluted flowing valve of circuit has an influence on stability of engine's work, and what follows on a performance of a car. The authors present a new in - vitro way of diagnosis in automotive vehicle, which depend on detection and measure of vibroacustic vibrations of the diesel engine. It seems that EGR circuit that does not work properly should not have an influence on vibrations generated by an engine. However, authors indicate that this statement is wrong. EGR system has an influence on engine's vibration, what was described in the article. On that way, detection of vibrations must be accomplished with high quality diagnostic systems. Therefore, vibrometric laser scanner Polytec had been used. To achieve full diagnostic results multidimensional vibration's function has been researched, where the torque moment has been used as an extra parameter. Measured vibrations were subjected to digital signal processing like windowing, fast Fourier transform, filtration by finite impulse response. The results of measure and processing perform in form of 3D plots, which indulge in speed estimate of the usefulness of presented method. Moreover authors presents principle of working EGRs' systems of different generations and its evolution.

Słowa kluczowe

EN

EGR system; fast Fourier transform; automotive diagnosis; vibroacustic analysis

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2008
• Tom: Vol. 15, No. 4
• Strony: 217--225
• Opis fizyczny: Bibliogr. 14 poz., rys.

Twórcy

autor

Kaźmierczak A.

autor

Wróbel R.

• Wroclaw University of Technology Institute of Machine Design and Operation Łukaszewicza Street 7/9, 50-371 Wrocław,

Bibliografia

• [1] Engine Technology International June 1999.
• [2] http://en.wikipedia.org/wiki/Exhaust_gas_recirculation.
• [3] http://www.asashop.org/autoinc/nov97/gas.htm.
• [4] http://forum.tdi-tuning.pl/viewtopic.php?p=4267.
• [5] Myszkowski, S., Instalator Polski: Diagnostyka Pokadowa.
• [6] http://60degreev6.com/index.php?title=Detailed_Sensor_Descriptions#Exhaust_Gas_Recirculation _ Valve_.28EGR.29.
• [7] Merkisz J., Mazurek S., Pokładowe systemy diagnostyczne pojazdów samochodowych,Wydawnictwa Komunikacji i Łączności, Warsaw 2002.
• [8] http://www.avl.com.
• [9] The Thrill of Solution: Dynamometers and Drivers, wyd. AVL, update 12.4.2001.
• [10] Stranneby D., Cyfrowe przetwarzanie sygnałów. Metody, algorytmy, zastosowanie,Wydawnictwo BTC, Warsaw 2004.
• [11] Zieliński T. P., Cyfrowe przetwarzanie sygnałów, Wydawnictwo WK, Warsaw 2005.
• [12] Lyons R. G., Wprowadzenie do cyfrowego przetwarzania sygnałów, Wydawnictwo WKŁ, Warsaw 2006.
• [13] Szabatin J. Podstawy teorii sygnałów, Wydawnictwo WKŁ, Warsaw 2003.
• [14] http://skoda.autokacik.pl/pages/chtyki/cha%20octavia.htm.