Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The present paper shows particularly description of the construction of the test stand for experimental research performed in University of Applied Science Giessen and connected with the measurements of hydrodynamic friction forces in journal slide bearings by using the Acoustic Emission Method. The test stand is adapted for the friction force measurements for the low bearing load and for the high bearing load. For such test stand in the case of low and high loads the dependencies between friction forces and time can be exactly obtained. During the measurements the temperature changes are expected. The advantage of this method is the fact that oscillations of measured friction values can be executed directly from the source to the sensor, what enables us to do an "online-measurement". The Acoustic Emission Analysis is (in opposite to the aforementioned Friction Power measurement) a relative method, which means, that the absolute amount of a RMS-Value depends on the measuring chain.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
591--595
Opis fizyczny
Bibliogr. 5 poz., rys.
Twórcy
autor
autor
autor
- University of Applied Sciences Gießen-Friedberg Wiesenstr. 14, 35390 Gießen, Germany tel:+49 6413092226, fax:+49 641 3092911, Burkhard.Ziegler@mmew.fh-giessen.de
Bibliografia
- [1] American Society of Testing Materials, Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response, American Society for Testing and Materials, USA, pp.976-94, 2003.
- [2] Chao, Zhang, Zixia, Yi, Zhiming, Zhang, THD Analysis of High Speed Heavily Loaded Journal Bearings Including Thermal Deformation, Mass Conserving Cavitation, and Turbulent Effects, Transactions of the ASME, Journal of Tribology, Vol. 122, pp.597-602, 2000.
- [3] Czichos, H., Habig, K.-H., Tribologie - Handbuch Reibung und Verschleiß, Vieweg & Sohn Verlag, Wiesbaden, 2003.
- [4] Dwyer-Joyce, R. S., Harper, P., Drinkwater, B. W., A Method for the Measurement of hydrodynamic Oil Films Using Ultrasonic Reflection. Springer Verlag, Tribology Letters, Vol.17 No.2, pp.337-348, 2004.
- [5] Niemann, G., Winter, H., Höhn, B.-R., Maschinenelemente, Band 1, Berechnung und Konstruktion von Maschinenelementen, Springer, Berlin, 2001.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ8-0003-0043