Enhancement of memory capacity in HDD micro- bearing

• Autorzy: Wierzcholski K.
• Języki publikacji: EN

Abstrakty

EN

The aim of the presented paper is presenting the shapes of HDD micro-bearing journal, which have influence on the enhancement of memory capacity. Moreover the asymmetrically grooved lateral surfaces of journal bearings generate the asymmetric pressure distribution, which leads to concentric rotation and eccentricity of a rotor. Most of the stiffness coefficient due to asymmetric grooves and hyperbolic shapes of lateral journal surfaces are bigger than those of the conventional cylindrical micro-bearings without grooves. The damping coefficients and friction torque due to asymmetric grooves and hyperbolic shapes of lateral journal surfaces are slightly bigger than those of the conventional cylindrical micro-bearings without grooves. The asymmetric grooves of hyperbolic micro journal bearings may have advantages in terms of small whirls radius and large dynamic coefficients occurring during the bearing exploitation. The idea of seeking of the slide micro-bearings with optimum of the capacity memory was implied from the author's investigation of human joints, which fulfil the role of intelligent bio-bearings. This paper investigates the dynamic behaviour of HDD micro-bearings with hyperbolic journal lateral shapes, by solving the proper Reynolds equation and the equation of a motion of a HDD spindle system. This paper presents the friction forces calculation in hydrodynamic HDD micro bearing lubrication with hyperbolic shapes of journals.

Słowa kluczowe

EN

HDD slide micro- bearings; hyperbolic journal shapes

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2008
• Tom: Vol. 15, No. 3
• Strony: 555--560
• Opis fizyczny: Bibliogr. 20 poz., rys.

Twórcy

autor

Wierzcholski K.

• Maritime University Gdynia Morska Street 81-87, 81-225 Gdynia, Poland tel.:[phone], fax:[phone],

Bibliografia

• [1] Asada, T., et al., Hydrodynamic bearings and applied technologies, Matsushita Tech., 46 (1), pp. 54-76, 2000.
• [2] Asada, T., Saito, H., Asaida, Y., Itoch, K., Design of hydrodynamic bearing for high-speed HDD. Microsystem Technologies, 8, pp. 220-226, 2002.
• [3] Bhushan, B., Nano-tribology and nanomechanics of MEMS/NEMS and BioMEMS, BioNEMS materials and devices. Microelectronic Engineering, 84, pp. 387-412, 2007.
• [4] Chizhik, S. A., Ahn, H. S., Chikunov, V. V., Suslov, A. A., Tuning fork energy dissipation nanotribometry as option of AFM, Scanning Probe Microscopy, pp. 119-121, 2004.
• [5] Chen, S. X., Zhang, Q. D., Design of fluid bearing spindle motors with controlled unbalanced magnetic forces. IEEE Transactions on Magnetics, 33 (5), pp. 2638-2640, 1997.
• [6] Fung, Y. C., Biomechanics, Motion, Flow, Stress and Growth, Springer Verlag, New York, Hong Kong 1993.
• [7] Fung, Y. C., The Meaning of Constitutive Equations in Biomechanics, Mechanical Properties of Living Tissues, Springer Verlag, Berlin 1993.
• [8] Gad-el-Hak, M., The MEMS handbook, CRC Press, 2001.
• [9] Jang, G. H., Lee, S. H., Kim, H. W., Kim, C. S., Dynamic analysis of a HDD spindle system with FDBs due to the bearing width and asymmetric grooves of journal bearing, Microsystems Technologies, 11, pp. 499-505, 2005.
• [10] Jang, G. H., Seo, C. H., Ho Scong Lee, Finite element model analysis of an HDD considering the flexibility of spinning disc-spindle, head-suspension-actuator and supporting structure, Microsystem Technologies, 13, pp. 837-847, 2007.
• [11] Jang, G. H., Park, S. J., Kim, C. S., Han, J. H., Investigation of the electromechanical variables of the spindle motor and the actuator of HDD due to positioning and the free fall, Microsystem Technologies, 13, pp. 797-809, 2007.
• [12] Jang, G. H., Yoon, W., Dynamic characteristics of a coupled journal and thrust hydrodynamic bearing in a HDD spindle system due to its groove location, Springer Verlag, Microsystem Technologies, 8, pp. 261-270, 2002.
• [13] Liu, L. X., Spakovszky, Z. S., Effects of Bearing Stiffness Anisotropy on Hydrostatic Micro gas Journal Bearing Dynamic Behavior, ASME, Journal of Engineering for Gas Turbines and Power, Vol. 129, pp. 177-184, 2007.
• [14] Lin, J. R., The Effects of Couple Stresses un the Squeeze Film Behaviour Between Isotropic Rough Rectangular Plates, Journal of Applied Mechanical Engineering, Vol. 6, No. 4, pp. 1007-1024, 2001.
• [15] Truckenbrodt, E., Strömungsmechanik, Springer Verlag, New York, Berlin 1986.
• [16] Truesdell, C., A First Course in Rational Continuum Mechanics, John Hopkins University, Baltimore, Maryland 1972.
• [17] Wierzcholski, K., Bio and slide bearings: their lubrication by non-Newtonian fluids and application in non-conventional systems. Vol.I, Second Edition: Principles of Human Joint Lubrication. Monograph. Gdask University of Tech., 2006.
• [18] Wierzcholski, K., Miszczak, A., Flow on the bio cell surfaces as an element of the micro-bearing tribology, Journal of Kones Powertrain and Transport, Vol. 14, No. 2, pp. 553-560, 2007.
• [19] www.oce.pg.gda.pl/biobearing/?path=8, 2006.
• [20] Yong-Bok, Lee, Hyun-Duck, Kwak, Chang-Ho-Kim, Nam-Soo, Lee, Numerical prediction of slip flow effect on gas-lubricated journal bearing for MEMS/MST - based micro-rotating machinery. Tribology International, 38, pp. 89-96, 2005.