The application of CrN and TiN coatings in slide bearing kinematic coupling pin surface layer modification processes

• Autorzy: Lubas J.
• Języki publikacji: EN

Abstrakty

EN

This work presents the results of tribological stand tests of slide bearings with pins modified with CrN and TiN coatings and pins with a TiN-steel 46Cr2 and CrN-steel 46Cr2 ,,ring" structure. The ,,rin" structure samples features materials with different tribological properties in the form of rings on the pin slide surface. Such a structure is obtained when covering the 46Cr2 steel pin base with a discrete layer of TiN or CrN, using the PVD method. The stand tests of frictional couplings have been performed for the frictional kinematic coupling pin with modified surface layer and CuPb30 and AlSn20 alloy bearing liner slice. During the tests the tribological couplings were lubricated with Castrol magnatec engine oil (5W/40). The tests were performed on a T-05 tribological tester. The test results demonstrated the tribological advantageous using the "ring" structure samples in the frictional couplings. The tests demonstrated that the friction forces and the bearing material quantity wear were the least for couplings with CrN steel, 46Cr2 and nitrogen hardening, and the largest for TiN pin couplings. Modification of the CrN pin surface layer has a beneficial impact on reducing frictional resistance, and temperature reduction in the friction area as well as reduction in bearing alloy wear.

Słowa kluczowe

EN

TiN; CrN; wear; sliding friction; surface treatment

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2008
• Tom: Vol. 15, No. 2
• Strony: 263--267
• Opis fizyczny: Bibliogr. 7 poz., rys.

Twórcy

autor

Lubas J.

• Rzeszow University, Institute of Technology Rejtana Street16A,35-959 Rzeszow, Poland tel. [phone], fax: [phone],

Bibliografia

• [1] Badis E., Fontalvo, G. A., Mitterer, C., The response of PACVD TiN coatings to tribological test with different counterparts, Wear, Vol. 256, pp. 95-99, 2004.
• [2] Kula, P. , Inżynieria warstwy wierzchniej, Politechnika Łódzka, od, 2000.
• [3] Nakonieczny, A., Powierzchniowe obróbki wyrobów metalowych, IMP, Warszawa, 2000.
• [4] Sp, J., Zielecki, W., Preliminary evaluation of the application possibility of bearing journal with two component surface layer, Tribologia, Vol. 3, pp. 811-819, 1995.
• [5] Stallard, J., Teer, D. G., A study of the tribological behaviour of CrN, Graphit-iC and Dymon-iC coatings under oil lubrication, Surface and Coatings Technology, Vol. 188-189, pp. 525-529, 2004.
• [6] Szczerek, M., Metodologiczne problemy systematyzacji eksperymentalnych badań tribologicznych, ITE, Radom 1997.
• [7] Wierzchoń, T., Precht, W., Ulbin-Pokorska, I., Sikorski, K., Struktura i odporność warstw azotku chromu wytwarzanych na stali metoda próżniowego odparowania łukowego, Inżynieria Materiałowa, Vol. 6, pp. 28-35, 2000.