Analysis of technological process of installation turbochargers

• Autorzy: Cygnar M. , Mazurków A. , Jaskólski J.
• Języki publikacji: EN

Abstrakty

EN

The technological process of installation of turbocharger as well as detailed analysis of chosen stages of installation having fundamental influence on the correct work of the turbocharger are presented in the article. The purpose of this article is performance of whole process of installation turbocharger as well as analysis of particularly significant stages of this process. The creature of turbocharging and it is myself this of working of turbocharger is enough simple. Difficulties appear if we put to the analysis conditions work of turbocharger: high temperature offumes, variable loads, aggressive environment of combustion gases, high rotatory speeds of rotors. Some of exploitation problems are possible to the elimination on the design stage or by means of application of appropriate materials. However technological process of installation is responsible for output quality and failure-free lasting work of turbocharger. In the process of installation it can distinguish some essential stages: processing and installation of shaft with the turbine's rotor, the weighing of turbine's rotor and the compressor, the installation of rotor's group, weighing of rotor's group in the trunk, positional tests under load. High rotary speeds cause during work of rotator so that created during of installation of turbocharger inappropriate balancing can bring to important damages of turbocharger. The correct course of process of installation and the final verification on braked position allows to avoid most of breakdowns of turbocharger group as well as to ensure long term of correct exploitation.From this reason very important is detailed analysis of respective stages of installation of group.

Słowa kluczowe

EN

turbocharger; installation of turbocharger's group; turbine's rotor; compressor's rotor

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2008
• Tom: Vol. 15, No. 2
• Strony: 35--39
• Opis fizyczny: Bibliogr. 9 poz., rys.

Twórcy

autor

Cygnar M.

autor

Mazurków A.

autor

Jaskólski J.

• State Higher Professional School in Nowy Sącz Address: Staszica 1, 33-300 Nowy Sącz,

Bibliografia

• [1] Budzik, G., Synteza i analiza metod projektowania i wytwarzania prototypów elementów o skomplikowanych kształtach na przykadzie wirników turbosprężarek, Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszow 2007.
• [2] Budzik, G., Marciniec, A.: Computer Aided Design of Turbochargers Rotor, Journal of KONES, Vol. 12, No. 1-2, pp. Warszawa 2005.
• [3] Budzik, G., Mazurkow A.: Research Of Dynamic Properties of Turbochargers C0-45, Journal of KONES Powertrain and Transport, Vol. 13, No. 3, Warszawa 2006, s. 41-46.
• [4] Jaskolski, J., Budzik, G., Marciniec, A.: Balancing of Turbocharger Rotors, Journal of KONES Powertrain and Transport, Vol. 14, No. 2, , pp. 217-222, Warszawa 2007.
• [5] Kiciski, J., Dynamika wirników i łożysk lizgowych, Wydawnictwo Instytutu Maszyn Przepływowych PAN, Gdask 2005.
• [6] Kowalewicz, A., Doadowanie silników spalinowych, Wydawnictwo Politechniki Radomskiej, Radom 1998.
• [7] Kordziski, C., Środulski, T., Silniki spalinowe z turbodoładowaniem, Wydawnictwa Naukowo - Techniczne, Warszawa 1970.
• [8] Mysłowski, J., Doładowanie silników, Wydawnictwa Komunikacji i Łączności, Warszawa 2006.
• [9] Santos, I. F., Nicolettii, R., Scalabrin, A., Feasibility of applying active lubrication to reduce vibration in industrial compressors, Proc. Of ASME Turbo Expo 2003, June 16-19, GT2003-38225, USA, Atlanta 2003.