Adhesion influence on the oil velocity and friction forces in hyperbolic microbearing gap

• Autorzy: Wierzcholski K. , Miszczak A.
• Języki publikacji: EN

Abstrakty

EN

In this paper are presented the influences of the adhesion forces occurring in hyperbolic micro contact on the oil velocity and friction forces in hyperbolic micro bearing gap. Here are elaborated the dependences between adhesive forces and oil dynamic viscosity in super thin boundary layer and influences of adhesive forces on the oil velocities and friction forces in micro- and nano-scale arising between two cooperating hyperbolic surfaces in micro-bearings. Oil dynamic viscosity is a sum of classical viscosity and viscosity caused by adhesion and cohesion forces. In hyperbolic micro-bearing the influence of adhesive forces on friction forces is visible not only in friction forces caused by the hydrodynamic pressure but also in friction forces caused by the oil flow velocity. The pressure distributions and capacity values in machine hyperbolic slide micro-bearings are determined in the lubrication region which is defined on the micro-bearing surfaces. Numerical calculations are performed in Mathcad 14 Professional Program implemented by virtue of difference method. In this paper are derived the formulas for velocity components, pressure distributions, friction forces and friction coefficients in hyperbolic coordinates and at the same time the adhesion forces are considered. Up to now the influence of adhesion forces on oil velocity and friction force changes in hyperbolic micro-bearing gap were not considered in analytical way. Present paper elaborat es the preliminary assumptions of hydrodynamic theory of lubrication for hyperbolic micro-bearing in the case if during the lubrication the adhesion forces are taken into account.

Słowa kluczowe

EN

adhesion forces; hyperbolic micro-bearing; oil velocity; hydrodynamic pressure

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2010
• Tom: Vol. 17, No. 3
• Strony: 483--489
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Wierzcholski K.

autor

Miszczak A.

• Technical University of Koszalin Institute of Mechatronics, Nanotechnology and Vacuum Technique Racławicka Street 15-17, 75-620 Koszalin, Poland tel: [phone], fax: [phone],

Bibliografia

• [1] Taylor, C. J., Dieker, L. E., Miller, K. T., Koh, C. A., Dendy, S. E., Micromechanical adhesion force measurements between tetrahydrofuran hydrate particles, Journal of Colloid and Interface Science, Vol. 306, pp. 255-261, 2007.
• [2] Yoon, E.-S., Yang, S. H., Han, H.-G., Kong, H., An experimental study on the adhesion at a nano-contact, Wear, Vol. 254, pp. 974-980, 2003.
• [3] De La Fuente, L., Montanes, E., Meng, Y., Li, Y., Burr, T. J., Hoch, H. C., Wu. M., Assessing adhesion force of Type I and Type IV Pili of Xylella fastidiosa bacteria by use of microfluidic flow chamber, Applied and Environmental Microbiology, Vol. 73, pp. 2690-2696, 2007.
• [4] Kogut, L., Etsion, I., Adhesion in elastic-plastic spherical microcontact, Journal of Colloid and Interface Science, Vol. 261, pp. 372-378, 2003.
• [5] Xu, L.-C., Logan, B. E., Adhesion forces functionalized latex microspheres and protein-coated surfaces evaluated using colloid probe atomic force microscopy, Colloid and Surfaces B, Vol. 48, pp. 84-94, 2006.
• [6] Takeuchi, M., Adhesion Forces of Charged Particles, Chemical Engineering Science, Vol. 61, pp. 2279-2289, 2006.
• [7] Miranda, J. A., Oliveira, R. M., Adhesion phenomena in ferrofluids, Physical Review E, Vol. 70, pp. 1-11, 2004.
• [8] Rymuza, Z., Kusznierewicz, Z., Solarski, T., Kwacz, M., Chizhik, S., Goldade, A. V., Static friction and adhesion in polimer-polymer micro-bearings, Wear, Vol. 238, pp. 56-69, 2000.
• [9] Schwender, N., Huber, K., Marravi, F. A., Hannig, M., Ziegler, C., Initial bioadhesion on surfaces in the oral cavity investigated by scanning force microscopy, Applied Surface Science, Vol. 252, pp. 117-122, 2005.
• [10] Tsukada, M., Irie, R., Yonemochi, Y., Nada, R., Kamiya, H., Watanabe, W., Kauppinen, E. I., Adhesion force measurement of a DPI size pharmaceutical particle by colloid probe atomic force microscopy, Powder Technology, Vol. 141, pp. 262-269, 2004.
• [11] Wierzcholski, K., Miszczak, A., A study on the adhesion at a micro and nano lubrication, Journal of KONES Powertrain and Transport, Vol. 16, No. 4, pp. 499-506, Warsaw 2009.
• [12] Wierzcholski, K., Miszczak, A., Adhesion and capilarity in micro- bearing lubrication, Journal of KONES Powertrain and Transport, Vol. 16, No. 3, pp. 497-504, Warsaw 2009.
• [13] Wierzcholski, K., Adhesion and cohesion forces occurring in parabolical microbearing, Tribologia, Nr 5 (227), pp. 221-228, 2009.
• [14] Wierzcholski, K., Adhesion influences on the pressure and carrying capacity of cylindrical microbearing, Wpływ adhezji na rozkład ciśnienia i siły nośne walcowych mikrołożysk, Tribologia, Nr 5 (227), pp. 229-236, 2009.
• [15] Zhou, H., Goetzinger, M., Peukert, W., The influence of particle charge and roughness on particle-substrate adhesion, Powder Technology, Vol. 135-136, pp. 82-91, 2003.