Numerical analysis of a shell with a main shaped charge warhead stroke into a bar armour with square section

• Autorzy: Niezgoda T. , Panowicz R. , Sybilski K. , Barnat W.
• Języki publikacji: EN

Abstrakty

EN

Recent operations of Polish troops within the framework of peacemaking missions' uncovered weak points of the equipment used there. It turned out that one of the most significant threats is a shell equipped with a main shaped charge warhead used by partisan detachments. These can break even 900mm of shell-proof steel so it is very difflcult to protect anything from the shells. One of the ways of protection from high explosive anti-tank (HEAT) warheads is using bar armours. This paper focuses on analysis of a shell with PG-7G main shaped charge warhead stroke into a bar armor with a square section. This work presents a short description of the analyzed object. Moreover, there is a principle of operation of a shell with the speciflcation of the most trouble elements from the point ofview of high velocity partial stream creation. In addition, the paper indicates steps of a numerical model construction together with geometry simplifications and initial-marginal conditions. On the basis of the results the researchers evaluated the extent of destruction of shell key elements. Furthermore, the work indicates drawings with deformed parts and presents stresses maps of these elements. The summary states to what extent PG-7G shell stroke into the armor made of bars with a square section influences reduction of operation efficacy of this type of firearm. Calculations were conducted in LS-Dyna system, which is used for oscillation analyses with a finite elements method. In order to solve the motion equation the researchers used an ordinary integration method used for i.e. analyses of highly non-linear oscillation phenomena.

Słowa kluczowe

EN

mechanics; finite elements method; bar armor; RPG

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2010
• Tom: Vol. 17, No. 3
• Strony: 327--332
• Opis fizyczny: Bibliogr. 5 poz., rys.

Twórcy

autor

Niezgoda T.

autor

Panowicz R.

autor

Sybilski K.

autor

Barnat W.

• Military University of Technology Department of Mechanics and Applied Computer Science Gen. Sylwestra Kaliskiego Street 2, 00 908 Warsaw, Poland tel: [phone],

Bibliografia

• [1] Jach, K., i in., Modelowanie własności dynamicznych ciał metodą punktów swobodnych, PWN, Warszawa 2001.
• [2] Military Parade, Russia, Moscow 2001.
• [3] Niezgoda, T., Panowicz, R., Barnat, W., i in., System obrony aktywnej do ochrony pojazdów przed pociskami z głowicami kumulacyjnymi, XXIII Międzynarodowa Konferencja N-T Ochrona ludności przed skutkami nadzwyczajnych zagrożeń, Ekomilitaris, Zakopane 2009.
• [4] www.ruag.com.
• [5] Wiśniewski, A., Pancerze budowa, projektowanie i badanie, WNT, Warszawa 2001.