Physico-Chemical Characteristics of Fe-Co/SiO2 Catalysts

• Autorzy: Kwintal P. , Bojarska J. , Jóźwiak W. K.
• Języki publikacji: EN

Abstrakty

EN

Bimetallic catalysts for Fischer-Tropsch synthesis containing iron-cobalt phase deposited on silica surface were prepared using three methods: co-precipitation deposition, wet impregnation and mechanical mixing. The aim of this work was to determine the mutual interaction between oxide components created in the course of subsequent stages of catalyst 34%Fe/51%Co/15%SiO2 preparation, calcinations and reduction. The physico-chemical properties of obtained catalysts were characterized by BET, XRD and TPR methods.

Słowa kluczowe

EN

Fischer-Tropsch synthesis; iron-cobalt catalysts; preparation methods; calcination temperature

• Wydawca: Polskie Towarzystwo Chemiczne
• Czasopismo: Polish Journal of Chemistry
• Rocznik: 2009
• Tom: Vol. 83, nr 10
• Strony: 1837--1847
• Opis fizyczny: Bibliogr. 30 poz., rys.

Twórcy

autor

Kwintal P.

autor

Bojarska J.

autor

Jóźwiak W. K.

• Institute of General and Ecological Chemistry, Technical University of Łódź, Żeromskiego 116, 90-924 Łódź, Poland,

Bibliografia

• 1.            Van der Laan G.P. and Beenackers A.A.C.M., Catal. Rev.-Sci. Eng., 255, 41 (1999).
• 2.            Schulz H., Appl. Catal A: Gen., 186, 3 (1999).
• 3.            Dry M.E., Catal Today, 71, 227 (2002).
• 4.            Jager B., Stud. Surface Sci. Catal, 119, 25 (1998).
• 5.            Luo M. and Davis B.H., Appl Catal A: Gen., 246, 171 (2003).
• 6.            de la Peńa O'Shea V.A., Alvarez-Galvan M.C., Campos-Martin J.M. and Fierro J.L.G., Catal Lett., 100, 105 (2005).
• 7.            Bartholomew C.H. and Farrauto J.F., Fundamentals of Industrial Catalytic Processes, Wiley Interscience, New York, 2006.
• 8.            Iglesia E., Soled S.L., Baumgartner J.E. and Reyes S.C., J. Catal, 153, 108 (1995).
• 9.            Ernst B., Libs S., Chaumette P. and Kiennemann A., Appl. Catal. A, 186, 145 (1999).
• 10.          Xu L.Y, Wang Q.X., Xu YD. and Huang J.S., Catal. Lett., 31, 253 (1995).
• 11.          Jothimurugesan K., Spivey J J., Gangwal S.K. and Goodxin J.G., Stud. Surface Sci. Catal, 119, 215(1998).
• 12.          Malats I Riera A., Pourroy G. and Poix P., J. Alloy Comp., 202, 113 (1993).
• 13.          Lakamp S. and Pourroy G., Eur. J. Solid State Inorg. Chem., 34, 295 (1997).
• 14.          Luo M., O'Brien R. and Davis B.H., Catal. Lett., 98, 17 (2004).
• 15.          Tihay R, Pourroy G., Richard-Plouet M. and Roger A.C., Appl. Catal. A: Gen., 206, 29 (2001).
• 16.          Cabet C, Roger A.C., Kiennemann A., Lakamp S. and Pourroy G., J. Catal, 173, 64 (1998).
• 17.          Mirzaei A.A., Habibpour R., Faizi M. and Kashi E., Appl. Catal. A: Gen., 301, 272 (2006).
• 18.          Reshetenko TV, Avdeeva L.B., Khassin A.A., Kustova G.N., Ushakov V.A., Moroz E.M., Shmakov A.N., Kriventsov V.V., Kochubey D.I., Pavlyukhin Yu.T, Chuvilin A.L. and Ismagilov Z.R., Appl. Catal. A: Gen., 268, 127 (2004).
• 19.          de la Peńa O'Shea V.A., MenendezN.N., Tornero J.D. and Fierro J.L.G., Catal. Lett., 88,123 (2003).
• 20.          Bi Y. and Dalai A.K., Can. J. Chem. Eng., 81, 230 (2003).
• 21.          Hagen S., Barford R., Fehrmann R., Jacobsen C.J.H., Teunissen H.T. and Chorkendorff I., J. Catal, 214, 327 (2003).
• 22.          Duvenhage D.J. and Coville N.J., Appl. Catal. A: Gen., 289, 231 (2005).
• 23.          Duvenhage D.J. and Coville N.J., Appl. Catal A: Gen., 153, 43 (1997).