Control of two wheel mobile manipulator on a rough terrain using reaction torque observer feedback

• Autorzy: Abeygunawardhana P. K. W. , Murakami T.
• Języki publikacji: EN

Abstrakty

EN

The mobile manipulator has the potential to become an efficient industrial robot due to its mobility and dexterity. Moreover, it has expanded the operational area of the mobile manipulator due to its ability to work in a limited space. However, adaptability to unknown environments has still not been developed to date. Therefore, adaptation of the mobile manipulator for unknown environments especially for rough/irregular terrain is discussed in this paper. Information about the environment, a key factor when aiming for compliance with an unknown and/or unstructured environment, was collected using a reaction torque observer. In order to adapt to the environment, compliance control was applied to the mobile manipulator. In this paper, we present a novel control strategy we have developed that can deal with unknown environments through the effective use of inverted pendulum control. Simulation and experiments were carried out to ensure the validity of the proposed method. The method could be confirmed as effective according to the results obtained.

Słowa kluczowe

EN

two-wheel mobile manipulator; inverted pendulum control; environment interaction; reaction torqueo; compliance control

• Wydawca: Łukasiewicz Industrial Research Institute for Automation and Measurements PIAP
• Czasopismo: Journal of Automation Mobile Robotics and Intelligent Systems
• Rocznik: 2010
• Tom: Vol. 4, No. 1
• Strony: 56--67
• Opis fizyczny: Bibliogr. 26 poz., rys.

Twórcy

autor

Abeygunawardhana P. K. W.

autor

Murakami T.

• Keyo University, Yokohama, Japan,

Bibliografia

• [1] Ch.-I., Fu L.-Ch., “Passivity based control of the double inverted pendulum driven by a linear induction motor”. In: Proceedings of 2003 IEEE Conference on Control Applications (CCA) 2003 , 23 rd -25 th June 2003, vol. 2, pp. 797-802.
• [2] Yasunobu S., Iwasaki T., “Swing up intelligent control of double inverted pendulum based on human knowth ledge”. In: SICE 2004 Annual Conference , 4 th -6 th August 2004, vol. 2, pp. 1869-1873.
• [3] Grasser F., Aldo D’Arrigo, Silvio Colombi, “JOE: A Mobile, Inverted Pendulum”, IEEE Transactions on industrial electronics , vol. 49, no. 1, 2002.
• [4] Hiroshi N., Murakami T., “An Approach to self Stabilization of Bicycle Motion by Handle Controller”. In: Proceedings of the First Asia International Symposium on Mechatronics, September 2004.
• [5] Iuchi K., Hiroshi N., Murakami T., “Attitude Control of Bicycle Motion by Steering Angle and Variable COG Control”. In: I ECON 2006. 32 nd Annual Conference of IEEE Industrial Electronics Society , 6 th-10 th Nov. 2006, pp. 2065-2070.
• [6] Abe H., Shibata T., Murakami T., “A Realization of Stable Attitude Control of two-wheels Driven Mobile Manipulator”. In: IEEE AISM Conference , December 2006.
• [7] Shibata T., Murakami T., “A Null Space Control of twowheels Driven Mobile Manipulator Using Passivity Theory”. In: Second Asia International Symposium on Mechatronics (AISM 2006).
• [8] Abeygunawardhana P.K.W., Murakami T., “Industrial Electronics Society, 2007. IECON 2007. 33 nd Annual Conference of IEEE”. In: Second Asia International Symposium on Mechatronics (AISM 2006) , 5 th-8 th Nov. 2007, Taipei, Taiwan, pp. 2712-2717.
• [9] Miyashita T., Ishiguro H., “Behavior Selection and Environment Recognition Methods for Humanoids based on Sensor History”. In: Proceedings of the 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, 9 th–15 th October 2006, Beijing, China, pp. 3468-3473.
• [10] Perez-Mendoza S.J., Ayala-Ramirez V., “Visual servoing for micro robotic platforms”. In: Proceedings of the 14 th International Conference on Electronics, Communications and Computers (CONIELECOMP’04) , 16 th-18 th Feb. 2004, pp. 18 th – 22 th.
• [11] Zha H., Tanaka K., Hasegawa T., “Detecting Changes in a Dynamic Environment for Updating its Maps by Using a Mobile Robot”. In: IROS’97. Proceedings of the IEEE/ RSJ International Conference on Intelligent Robots and Systems, 7 th -11 th Sept. 1997, vol. 3, pp. 1729-1734.
• [12] Murakami T., Yu F., Ohnishi K., “Torque Sensorless Control in Multi degree of Freedom Manipulator”, IEEE Transaction on Industrial Electronics , vol. 40, no. 2, April 1993, pp. 259-265.
• [13] Kim J.-O., Khosla P. K., “Real-time obstacle avoidance using harmonic potential functions”, IEEE Transactions on Robotics and Automation , vol. 8, issue 3, June 1992, pp. 338-349.
• [14] Rimon E., Koditschek D. E., “Exact robot navigation using artificial potential functions”, IEEE Transactions on Robotics and Automation , vol. 8, issue 5, October 1992, pp. 501-518.
• [15] Utkin V.I., Drakunov S.V., Hashimoto H., Harashima F., “Robot path obstacle avoidance control via sliding mode approach”. In: Proceedings IROS. IEEE/RSJ International Workshop on Intelligent Robots and Systems Intelligence for Mechanical Systems , 3 rd-5 th November 1991, vol. 3, pp. 1287-1290.
• [16] Choi J.-S., k Kim B.-K., “Near-time-optimal trajectory planning for wheeled mobile robots with translational and rotational sections”, IEEE Transactions on Robotics and Automation , vol. 17, issue 1, February 2001, pp. 85-90.
• [17] Fujimura K., “Route Planning For Mobile Robots Amidst Moving Obstacles”. In: Proceedings of the 1992 EEE/RSJ International Conference on Intelligent Robots and Systems, 7 th-10 th July 1992, vol. 1, pp. 433-438.
• [18] Nagami A., Murakami T., Ohnishi K., “A power-assistant platform taking environmental disturbance into ac66 Articles Journal of Automation, Mobile Robotics & Intelligent Systems VOLUME 4, N° 1 2010 count”. In: Proceedings of the 6 th International Workshop on Advanced Motion Control , 2000, pp. 152-157.
• [19] Katsura S., Ohnishi K., “Human Interaction by a Wheelchair”. In: IECON’02. Industrial Electronics Society, IEEE 28 th Annual Conference , vol., 5 th -8 th Nov. 2002, pp. 2758-2763.
• [20] Katsura S., Ohnishi K., “A Wheelchair type mobile robot Taking Environment Disturbance into Account”, In: 7th International Workshop on Advanced Motion Control , 3 rd-5th July 2002, pp. 500-505.
• [21] Kouhei O., Murakami T., Masaaki S., “Motion control for Advanced Mechatronics”, IEEE/ASME Transactions on Mechatronics, vol. 1, no. 1, March 1996, pp. 56-67.
• [22] Oda N., Murakami T., Ohnishi K., “A force based motion control strategy for hyper-redundant manipulator”. In: IECON‘97. 23 rd International Conference on Industrial Electronics, Control and Instrumentation , 9 th-14 th Nov. 1997, vol. 3, pp. 1385-1390.
• [23] Murakami T., Kahlen K., De Doncker R.W.A.A., “Robust motion control based on projection plane in redundant manipulator”, IEEE Transactions on Industrial Electronics, vol. 49, issue 1, February. 2002, pp. 248-225.
• [24] Abeygunawardhana P.K.W., Murakami T., “Environmental Interaction of two-wheel Mobile Manipulator using Reaction Torque Observer”. In: Proceedings of the 2008 IEEE International Conference on Advance Motion Control. AMC’08 , 26 th– 28 th March 2008.
• [25] Huang Q., Chen X.D., Oka K., “Phased Compliance Control with Virtual Force for Six Legged Robot”, International Journal of Innovative Computing Information and Control, vol. 4, issue: 12, December 2008, pp. 33593373.
• [26] Morisawa M., Kouhei O., “Parallel Link Biped Robot Motion Control ”, PhD Dissertation, 2003, pp. 45-46. Articles.